1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
1967-68 Mustang Fastback; Exterior Quarter Vent Assemblies; with Hardware
Reproduction of the original exterior quarter panel vents designed for use with 1967-1968 Mustang Fastback models. Each louvered panel is manufactured in quality stamped steel to OE specifications. These panels are located...
1964-68 Mustang, 1967-68 Cougar; Windshield Molding Set; Coupe/Fastback; 5 Piece Set
Reproduction of the original windshield molding set designed for 1964-68 Mustang coupe and Fastback models, and 1967-68 Cougar coupe models. This reproduction is manufactured in stainless steel as original. This 5-piece...
1967-68 Ford Mustang; Fastback; Metal Roof Drip Rail; Pair; EDP Coated
One of the most common rust areas on early Mustangs was the metal roof drip rail. We offer these exact reproductions manufactured in stamped steel to orioginal factory dimensions. Now you can replace the original damaged, or...
1964-68 Ford Mustang; Coupe; Roof Rail Moldings
Reproduction of the original style roof rail moldings designed for use with 1964-68 Mustang coupe models. Worn, dented and unsightly drip rail moldings can now be replaced with new highly polished stainless steel reproduction...
1967-68 Ford Mustang; Aluminum Hood Lip Molding
Reproduction of the original hood lip molding designed for use on 1967-68 Mustangs. Mounts on the edge of the hood above the grille. Produced in highly polished stamped aluminum as original, this finely crafted hood peak...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1967-68 Mustang; Rocker Panel Moldings; with Hardware; RH and LH; Pair
Reproduction of the original rocker panel moldings designed for use on 1967-68 Mustangs. Each molding is manufactured in aluminum to exact factory specifications offering a perfect fit and original appearance. Installs along...
1967-68 Mustang; Rocker Panel Molding; with Hardware; Drivers Side
Reproduction of the original rocker panel molding that runs along the outer rocker panel of the exterior on your 1967-68 Mustang just below the door. Each molding is manufactured in quality stamped aluminum replicating the...
1967-68 Mustang Fastback; Roof Drip Rail Molding Set; Pair
Reproduction of the original roof drip rail moldings designed for use with 1967-68 Mustang Fastback models. Each molding is manufactured to factory specifications replicating the original in every detail. Replace worn or...
1967-70 Mustang Fastback 27 Piece Rear Window Clip Kit
When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1967-70 Fastback models. {specs} {fitment}
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Windshield Molding; RH
Reproduction of the original front vertical windshield molding for 1964-68 Mustang coupe and fastback models, and 1967-68 Cougar coupe models. Manufactured to exact factory specifications in polished stainless steel as...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1967-68 Ford Mustang; Coupe; Rear Window Molding Set; 4 Pieces
Correct reproduction of the original rear window moldings designed for use with 1967-68 Mustang coupe models. These stainless steel moldings are an excellent reproduction of the originals that surround the rear glass offering...
1967-68 Mustang; Rear Window Molding Set; Fastback; 6 Piece Set
Reproduction rear window molding set that surround the rear glass on 1967-68 Mustang Fastback models. Each molding is manufactured in quality stamped aluminum offering a bright OE appearance. These stainless steel moldings...
1967-68 Mustang; Rocker Panel Molding; with Hardware; RH Passenger Side
Reproduction of the original rocker panel molding that runs along the outer rocker panel of the exterior on your 1967-68 Mustang just below the door. Each molding is manufactured in quality stamped aluminum replicating the...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Lower Windshield Molding
Reproduction of the original lower windshield molding for 1965-68 Mustang and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original. Applications: 1964-1968 Ford Mustang...
1967-68 Mustang; Rear Wheel Opening Molding; RH Passenger Side
Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original configuration and fits the...
1967-68 Ford Mustang; Fastback; Center Trunk Lid Molding
Reproduction of the original style rear trunk lid moldings for use with 1967-68 Mustang Fastback models. Molding is manufactured to correct factpry specifications for an original appearance and fit. NOTE: Luggage compartment...
1967-68 Mustang; Rear Wheel Opening Molding; LH Drivers Side
Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original configuration and fits the...
1967-68 Ford Mustang; Front Wheel Opening Molding; LH
Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the...
1967-68 Ford Mustang; Front Wheel Opening Molding; RH
Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Upper Windshield Molding; LH
Reproduction of the original upper windshield molding for 1964-68 Mustang coupe, 1965-68 Mustang Fastback, and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original....
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Upper Windshield Molding; RH
Reproduction of the original upper windshield molding for 1964-68 Mustang coupe and Fastback models, and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original....
1964-68 Mustang Coupe; Rear Window Molding Clip Kit; 19-Pieces
When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1964-66 Mustang coupe models. {specs} {fitment}
1967-68 Mustang; Rocker Panel Molding Clip Set; LH Driver Side
Reproduction of the original hardware used to install the rocker panel moldings on 1967-68 Mustangs. Correct replacement plastic clip set used to install 1967-68 rocker moldings for LH driver side. This set includes clips and...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Windshield Molding; LH
Reproduction of the original front vertical windshield molding for use with 1964-68 Mustang coupe and fastback models, and 1967-68 Cougar coupe models. Manufactured to exact factory specifications in polished stainless steel...
1966-68 Mustang Convertible 24 Piece Windshield Molding Clip Kit
When replacing the windshield moldings it's a good idea to replace the clips. This is a reproduction set of the original clips and screws used to attach the front windshield moldings on 1966-68 Convertible models. Includes 14...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
1967-68 and 1970 Ford Mustang; Rocker Panel Molding Plastic Clip
Reproduction rocker molding clip for select 1967-70 Ford Mustangs. Additional hardware or retainers may be required depending on the model. Replaces Ford part# C7ZZ-6510182-A. Applications 1967-68 Mustang - 12 per vehicle...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1967-68 Mustang Coupe Rear Window Lower Molding Push-On Clips
Reproduction back glass molding clip for 1967-68 Mustang models. Manufactured to factory specifications for proper fitment and function.
1967-68 Mustang Wheel Opening Molding Kit
Correct reproduction of the original Mustang wheel opening molding. Each molding is roll-formed as original and replicates the original and includes correct mounting scres for a complete replacement. Kit includes: Left Front...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1967-68 Ford Mustang; Quarter Panel Upper Extension; Fastback; RH
An authentic reproduction die-cast quarter panel end cap for a 1967-68 Mustang fastback models. This upper extension bolts on to the rear edge of the quarter panel, and blends the body lines of the quarter panel, trunk lid,...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1967-68 Mustang; Fastback; Roof Rail Sash Moldings
Stainless steel roof rail sash moldings for 1967-68 Mustang Fastback models. This molding attaches under the roof rail as an attachment point for the roof rail weatherstrip channel. Sold in pairs. Applications: 1967-1968 Ford...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
1967-68 Ford Mustang; Quarter Panel Upper Extension; Fastback; LH
An authentic die cast reproduction quarter panel end cap for a 1967-68 Mustang fastback models. This upper extension bolts on to the rear edge of the quarter panel, and blends the body lines of the quarter panel, trunk lid,...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
1964-68 Mustang Windshield and Rear Window Molding Clip Set ; 12 Piece Set
Reproduction of the original style windshield molding clips designed for use on 1965 Mustangs. These clips will mount the molding and screw into position. For use on various front windshield moldings. 12 piece set. Use as...
1964-68 Mustang 12 Piece Windshield Molding Clip Screw Set
Replacement screws for 1964-68 windshield molding clips that use screws to mount to the body. This is a set of 12 screws.
1967-68 Mustang; Rocker Panel Molding Clip Set; Passenger Side
Reproduction of the original hardware used to install the rocker panel moldings on 1967-68 Mustangs. Correct replacement plastic clip set used to install 1967-68 rocker moldings for RH passenger side. This set includes clips...