1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1967-70 Mustang Fastback 27 Piece Rear Window Clip Kit
When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1967-70 Fastback models.
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
Accurate reproduction of the injection molded clip set for long bed trucks with 1-1/2" body side moldings. Includes the 32 clips that are required for long bed models and comes with rivets for installation. Replaces Ford Part...
Accurate reproduction of the injection molded clip set for short bed trucks with 1-1/2" body side moldings. Includes the 28 clips that are required for short bed models with rivets for installation. Replaces Ford Part # :...
1964-68 Mustang Coupe; Rear Window Molding Clip Kit; 19-Pieces
When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1964-66 Mustang coupe models.
1966-68 Mustang Convertible 24 Piece Windshield Molding Clip Kit
When replacing the windshield moldings it's a good idea to replace the clips. This is a reproduction set of the original clips and screws used to attach the front windshield moldings on 1966-68 Convertible models. Includes 14...
1967-68 and 1970 Ford Mustang; Rocker Panel Molding Plastic Clip
Reproduction rocker molding clip for select 1967-70 Ford Mustangs. Additional hardware or retainers may be required depending on the model. Replaces Ford part# C7ZZ-6510182-A. Applications 1967-68 Mustang - 12 per vehicle...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1967-68 Mustang Coupe Rear Window Lower Molding Push-On Clips
Reproduction back glass molding clip for 1967-68 Mustang models. Manufactured to factory specifications for proper fitment and function.
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
1964-68 Mustang Windshield and Rear Window Molding Clip Set ; 12 Piece Set
Reproduction of the original style windshield molding clips designed for use on 1965 Mustangs. These clips will mount the molding and screw into position. For use on various front windshield moldings. 12 piece set. Use as...
1964-68 Mustang 12 Piece Windshield Molding Clip Screw Set
Replacement screws for 1964-68 windshield molding clips that use screws to mount to the body. This is a set of 12 screws.
1967-68 Mustang; Rocker Panel Molding Clip Set; Passenger Side
Reproduction of the original hardware used to install the rocker panel moldings on 1967-68 Mustangs. Correct replacement plastic clip set used to install 1967-68 rocker moldings for RH passenger side. This set includes clips...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
1967-68 Mustang Coupe 7 Piece Rear Window Lower Molding Push-On Clip Set
Reproduction back glass molding clip set for 1967-68 Mustang models. Manufactured to factory specifications for proper fitment and function.
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8
Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head
Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...