1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1967 Camaro, Firebird; Subframe Assembly; OEM Style; without Trans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high-quality Restorer's Choice™ reproduction. This reproduction subframe assembly is designed and...
Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...
5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1967-69 Camaro; Firebird; Complete Front End Rebuild Kit
Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each component is manufactured...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; Pair
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1967-69 Camaro; Front End Rebuild Kit; With Outer Tie Rod Ends Only
Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Be sure you install what the...
1967-69 Camaro, Firebird; Rear Shock Upper Mounting Plate; Pair
One of the most commonly rusted, damaged or accidentally discarded items in the rear suspension is this rear upper shock mount plate. This plate is mounted between the upper shock bushings and bolts to the factory weld nuts...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
Rear Shock Extension Fine Thread
Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
1967-69 Chevrolet, Pontiac; Rear Axle Pinion Rubber Bumper, Each
OER reproduction of the rear axle pinion bumper for 1967 Camaro/Firebird (2nd design), 1968-69 Camaro, Firebird models, and 1968-69 Chevy II / Nova models. Manufactured from quality molded rubber offering an original...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1964-69 Camaro, Nova, Firebird; Front Sway Bar Brackets; Pair
Reproduction of the original style U-shaped sway bar bushing clamps designed for use on various 1967-69 GM models. These factory correct reproductions are used to hold the inner sway bar bushings and the sway bar to the...
1967 Camaro; Rear End Square Traction Bar Bracket
Reproduction of the original traction bar to rear axle tube traction bar mounting bracket for the RH passenger side on 1967 Camaros with 350, 396, and Z28 302 models. The traction bar supports and attaches the rear traction...
1967-69 Camaro, Firebird; Rear Shock Reinforcement Plate
Reproductions of the original rear shock mount reinforcement plate for 1967-69 Camaro and Firebird models. This die stamped, heavy steel plate mounts to the trunk floor and has features two threaded holes.Comes with black EDP...
1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set
This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...
1967-69 Camaro, Firebird; Plastic Shock Cap; 4 Piece Set
Finally there's a quality reproduction of the often missing or broken shock cap. This cap is installed to cover the nut and threads to protect the threads from damage. Correct reproduction of the original injection molded...
Reproduction of the 350, L-48 Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 12-piece hardware set mounts the radius rod to the rear axle housing and floor. The original style hardware...
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. Has 2" Spacer {fitment}
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1967 Camaro; OE Style Traction Bar Installation Hardware Kit; 6-Piece Kit
Reproduction Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 6-piece hardware set mounts the Traction bar/Radius rod to the rear axle housing bracket and to the front anchor plate. The...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1967-81 Rear Spring Eye Bracket Bolt Set (6 piece)
Quality reproduction of the original rear spring eye bracket bolt designed to mount the leaf spring front eye bracket. Each bolt is case hardened for durability and long lasting performance. 6 bolts included in each set....
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967 Camaro, Firebird; Subframe Assembly; with TH400 Crossmember; OE-Style
Reproduction of the original complete sunframe assembly designed for use with 1967 Camaro and Firebird models with TH 400 crossmembers. Why waste money trying to repair a damaged subframe that may be compromised internally...
1967-69 Camaro, Firebird; 1962-69 Chevy II Nova; Rear Leaf Spring Shackle; LH or RH Side; Each
Reproduction rear spring shackle for 1967-69 Camaro and Firebird models. Shackle is manufactured to OE specifications to replicate the original in appearance, quality, fit and design. Each shackle includes all the necessary...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-69 Camaro Z/28, Firebird 400, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-69 Camaro Z28 (302), 1968-81 Firebird 400 and performance models, Chevy II Nova and GM X-body models with 4 leaf rear springs. Each leaf spring...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-69 Camaro, Firebird, 1968-74 Nova; Tubular Control Arm Set; Upper
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1967-69 Camaro, Firebird, Nova; Front Sway Bar Set; 1-1/8" Bar
Replacement sway bar designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Kit includes:...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
Rear Shock Extension Coarse Thread
Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are an essential ingredient in maintaining control of the vehicle. Worn-out bushings are likely to effect the performance and handling of your classic. Replacing the old bushings can not only increase...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1967-69 Camaro, Firebird; Shock Absorber Plastic Cap; Pair
Correct reproduction of the original injection molded plastic shock absorber cap designed for use with 1967-69 Camaro and Firebird models. This is the cap that threads onto the top of the shock to protect the threads from...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-69 Camaro, Firebird, 1962-69 Chevy II Nova; Leaf Spring Shackle Bushing Set; 8 Piece Set
Reproduction of the original style leaf spring shackle bushings for use with 1967-69 Camaro, Firebird, and 1962-69 Chevy II and Nova models. Replace your cracked, shrunken or worn out shackle bushings and bring your rear...
1967-69 Camaro. Firebird; Coil Spring Front Upper Mounts; Pair
Reproduction front coil spring upper mounts for 1967-69 Camaro, Firebird, and Trans Am models. Manufactured in stamped steel to original factory specifications. Why rely on tired coil spring mounts when you can weld in fresh...
1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models
Reproduction of the rear axle pinion bumper for various GM models. Manufactured from quality molded rubber, with an integrated steel bracket in the correct OE configuration, offering an original appearance and fit. This...
1967-74 Camaro, Firebird, Nova; Front Sway Bar Sleeve Brackets; Pair
Reproduction of the correct front sway bar sleeve brackets designed for use with various 1967-74 Chevrolet, Buick, Oldsmobile, and Pontiac models. These sleeve brackets mount on the front sway bar next to the sway bar bracket...
1967-69 Camaro / Firebird, 1962-74 Chevy II/Nova; Mono Leaf Spring Pad Set
Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs. {fitment}
1967 Camaro; Traction Bar Lower Stop Bracket Hardware Kit; 5-Piece Kit
Reproduction Z/28 and L78 Camaro square traction bar installation hardware for 1967 Camaro models. This reproduction 5-piece hardware set mounts the traction bar stop bracket to the rear axle housing bracket and mounts the...
1967-81 6 Piece Spring Eye Bracket Nut Kit
This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket. Sold as a 6 piece kit. Applications: 1973-74 Buick Apollo 1975-79 Buick Skylark 1967-81 Chevrolet Cam aro 1968-79 Chevrolet...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...