Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1967-69 Camaro, Firebird; Quarter Window Attachment Assembly; LH Drivers Side
Reproduction of the original rear window attachment and roller assembly designed for use on 1967-69 Camaro and Firebird models. This quarter window attachment assembly includes window mount bracket and two rollers that attach...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
Bolt; Hex Head; 5/16"-24 x 3.0"; Grade 5; Cap Screw; Silver Zinc
5/16"-24 x 3.0" Lg Hex Head Cap Screw, Grade 5, Zinc plated
1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a set of 10, refer to part...
Phillips Oval Head Chrome Trim Screw; #8 x 3/4"; with Undersized # 6
Phillips Oval Head Tap Screw # 8 X 3/4 Chrome # 6 Head Specifications: Screw Size : #8 Length : 3/4" Head Style : Phillips Oval Point Type : A/AB Head Size : #6 Finish : Chrome
U-Nut #10 Screw Size; Panel Clip; Phosphate; Each
Correct U-nut used on various GM vehicles including for the glove box of 1967-72 Chevrolet and GMC trucks. This part is original equipment style for multiple GM applications, and it can be used for a variety of other...
Sheet Metal Screw #8 x 5/8" Hex Head Black
Specialty screw used for many GM sheet metal applications. This black phosphate hex screw is designed for use when installing fenders and other sheet metal components to the body. For general use #8 x 5/8" hex head. Sold...
Universal Hex Head Sems Bolt; M6-1.0 X 20mm; Black Phosphate; Each
Black phosphate hex head Sems metric bolt, that measures M6-1.0 X 20 mm to install and secure various components Specifications: Quantity: Individual Bolt Class: 9.8 Color: Black Phosphate Material: Steel Specs: M6 -1.0 X 20...
Black phosphate hex head Sems metric bolt designed to OE standards for securing various underhood and body components. Measuring M6-1.0 X 30 mm, this high-strength fastener is manufactured in steel and finished in black...
1961-81 GM; Cupped Fender Washer; 2-1/4" Overall Diameter; Each
Reproduction cupped style fender washer designed for a wide variety of 1960-81 GM vehicles, including 1961-72 Impala and other full-size models, 1967-81 Camaro and Firebird, 1964-72 GM A-body models, 1964-73 Nova and other...
Secure critical components with this installation hardware set designed for 1985-92 Camaro models, including IROC-Z. Each set includes 25 pieces of the reproduction GM 10287379 hex head SEMS bolt, manufactured to factory...
1960-81 GM; Cupped Fender Washer Set; 2-1/4" Overall Diameter; 20 Piece Set
Reproduction cupped style fender washer set designed for a wide range of 1960-81 GM vehicles, including 1960-72 Impala and other full-size models, 1967-81 Camaro and Firebird, 1964-72 GM A-body models, 1964-73 Nova and other...
Door or Tailgate Striker Plate Mounting Screw; 5/16-18 X 3/4; Phillips Head; Each
Reproduction of the original 5/16-18 X 3/4; Phillips head zinc plated screw often used to install the door striker plate on various models. Sold individually. Use as required.
Ford Fender Bolt Set; 5/16"-18 x 1-1/16 Hex; Yellow Dichromate; 12 Pieces
Set of 12 Zinc and Yellow Dichromate 5/16"-18 x 1-1/16" hex head sems body bolts with dog point ends. Enough to do the top of the fenders for both sides on 1965-70 Ford Mustang and will fit many other Ford models including...
5/16" -18 X 1" Hex Washer Head Spin Lock Bolt; Phospate Coating; Set of 24
Reproduction 5/16" x 18 x 1" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Popular Application Information:...
Bolt; Hex Head; M6-1.0 X 16mm; DIN 933; Cap Screw; Silver Zinc
Zinc coated hex head DIN 933 Cap Screw metric bolt, that measures M6-1.0 X 16 mm to install and secure various components Specifications: Class: DIN 933 Color: Silver Zinc Material: 8.8 Heat Treated Alloy Steel Specs: M6 -1.0...
18 Gauge Washer; 1/4 Bolt Size; 9/32" I.D. - 1-1/4 O.D. 1/16"; Thick; Zinc
Zinc coated large diameter fender washer that measures 1-1/4" in outside diameter and accepts a 1/4" bolt to install and secure various components Specifications: Class: Fender Washer Color: Silver Zinc Material: Steel Type:...
5/16"-18 x 1-1/16 Hex Head Sems w/ Dog Point; 7/8" Washer O.D.; Yellow Dichromate
This Zinc and Yellow Dichromate 5/16"-18 x 1-1/16" hex head sems body bolt with dog point is sold individually. For a set of 12 bolts, refer to part # HK107. Product Specifications Hex head sems body solt with dog point Zinc...
Spring Type U-Nut, #10 Screw Size, Black Phospate Coated
Spring Type U-Nut, #10 Screw Size, Black Phospate Coated Specifications: Screw Size : #10 Panel Range : 0.025-0.150" Center of Hole to Edge : 9/16" Finish : Phosphate
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
1967-77 Buick, Chevy, Pontiac, Olds; Windshield Glass Support Stop Bracket; Each
Reproduction windshield glass support for 1967-69 Camaro and Firebird models. This support is manufactured to OE specifications and used to position and support the windshield glass. When the windshield is put in place over...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Sold...
1967-81 Camaro, Nova, Firebird; Upper Door Hinge Bolt Set; 14 Piece Bolt Set
Reproduction upper door hinge case hardened bolts for 1967-81 Camaro, Firebird, and 1968-72 Chevy II, Nova models. This complete set of bolts will allow attachment of the door hinges for both RH and LH upper door hinges....
1962-67 Nova, 1967 Camaro, Firebird; Door Hinge Screw Set; 12 Piece Set
Reproduction door hinge screw set for 1962-67 Chevy II and Nova and various other models. Manufactured to original specifications ensuring a proper fit. Each hinge required 6 screws, three on door and three on body. Also used...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
Reproduction quarter window track to body mounting studs and nuts for 1967-69 Camaro and Firebird models. Each stud is manufactured to factory specifications in plated steel and includes the correct oversized flange nuts. One...
1962-79 Blower Motor Mounting Screw Set ; without AC ; Various Models
Reproduction of the original style screws required to mount the blower motor to the firewall on various GM models without air conditioning. Includes 5 screws. Chevrolet Applications 1964-1972 Chevrolet Impala (w/o AC)...
1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1964-98 GM; Door Lock Striker Bolt Shim - 4.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1967-69 Camaro, Firebird; Quarter Window Track Nut Set; with Large Flange; 3 Piece Set
Reproduction quarter window track mounting nuts for 1967-69 Camaro and Firebird models. Each nut is manufactured to exact factory specifications and features the correct oversized flange for proper fit and function. These...
1966-67 GM, 1967 Camaro, Firebird; Vent Window Assembly Screw Set; Pair
Reproduction vent window assembly screw set for 1967 Camaro and Firebird and a wide variety of other GM models. This screw set is used to mount the vent assembly to the door. Replaces the often rusty or discolored original...
1967 Camaro/Firebird Vent Window Frame Adjusting Screws (Pair)
Reproduction upper and lower vent frame adjusting screw used for the fine adjustment of the vent window assembly in all 1967 Camaro models. These screws are threaded on both ends with a shoulder on one end and feature the...
5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each
Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...
Reproduction rear quarter window tension spring for a wide variety of GM A-Body and F-Body coupe and convertible models. Manufactured in spring steel as original to provide the proper tension as the factory required. Sold...
1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer
Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...
1965-2002 Buick, Chevy, Cadillac, Pontiac, Olds; Door Lock Striker & Washer; Each
Correct reproduction door lock striker and washer for various 1965-2002 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Each striker is manufactured to correct factory specifications including correct...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1967-69 Camaro/Firebird ; Convertible Top Boot Clip Set; 16 Piece Set; Reproduction
Correct reproduction top boot clips for 1967-69 Camaro & Firebird convertible models. The clips are specifically designed to hold the top boot to the convertible well molding when the convertible top is in the down position....
1967 Camaro, 1967-68 Firebird; Door Hinge Repair Kit; 16 Piece Set
Repair the broken door hinges on your 1967 Camaro or 1967-68 Firebird with this comprehensive door hinge repair set. Each repair kit includes 4 properly hardened shoulder pivot pins, 4 circlips for pivot pins, and 8 sintered...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1967-69 Camaro, Firebird; Quarter Window Track; LH Drivers Side
Reproduction of the original quarter window track designed for use with 1967-69 Camaro and Firebird coupe or convertible models. Each track is manufactured in stamped steel and plated with the correct finish. Replaces...
1967-69 Camaro, Firebird; Quarter Window Track; RH Passenger Side
Reproduction of the original quarter window track designed for use with 1967-69 Camaro and Firebird coupe or convertible models. Each track is manufactured in stamped steel and plated with the correct finish. Replaces...
1967 Camaro, Firebird; Vent Window Assembly Hardware; Per Side
Reproduction of the original style vent window assembly hardware designed for use with 1967 Camaro and Firebird models. Each hardware set is designed to mount the vent window assembly securely to the door, replicating the...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each
Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...
1959-72 GM; Trunk Latch Mounting Bolt Set; Various Models
Reproduction of the original 1/4-20 x 5/8 Hex Head SEMS machine screw syle bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...