1967 Chevrolet Nova SS; Trunk Lid Panel Molding; Die-Cast
OER reproduction rear trunk lid molding for 1967 Chevrolet Nova Super Sport models. Each molding is manufactured in high-quality die-cast zinc featuring the correct paint scheme and a chromed finish replicating the original...
1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1967-69 Camaro; Rocker Panel Molding; with Hardware; Each
Excellent quality reproduction of the original molding that attaches directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. When only the best quality will do, we offer this...
1967-69 Camaro, Firebird; Roof Drip Rail Molding Corner Connectors; Pair
Reproduction of the original roof drip corner connector moldings designed for use on 1967-69 Camaro and Firebird models. Each molding is designed to attach the pillar post molding to the roof drip molding. Manufactured in the...
1967-69 Camaro, Firebird; Roof Drip Rail A-Pillar Moldings; Coupe; Pair
Reproduction of the original roof drip pillar post moldings designed for use on 1967-69 Camaro and Firebird models. Each molding is a replication of the original manufactured in quality aluminum material that fits and...
1967 Impala SS; Front Grill Kit, SS Models without Corner Lamps
Reproduction front grill, headlight bezels, and trim for 1967 Chevrolet Impala Super Sport models. These authentic reproduction components are manufactured in quality stamped aluminum material to exact factory dimensions...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; Models without Corner Lamps
Reproduction front grill, headlight bezels, and trim for 1967 Chevrolet Impala and full size models (Except Impala SS). These authentic reproduction components are manufactured in quality stamped aluminum material to exact...
1967-69 Camaro / Firebird; Roof Drip Rail Molding; Coupe; LH Drivers Side
Reproduction of the original roof drip molding designed for use on 1967-69 Camaro and Firebird models. Each molding is stamped in quality bright aluminum material matching the original in configuration and fitment. Will fit...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; models with Optional Corner Lamps
Reproduction of the original front grill, headlight bezels, and grill filler moldings designed for use with 1967 Chevrolet Impala (non SS), Bel Air, Biscayne and Caprice models. These authentic reproduction components are...
1967 Chevrolet Nova SS; Lower Body Side Molding Set; with Hardware; 10 Piece Set
Reproduction of the original style lower body side molding kit designed for use specifically with 1967 Nova Super Sport models. Each molding is manufactured in quality stamped aluminum featuring correct contours and a bright...
1967-69 Camaro, Firebird Coupe; Windshield Molding Set; Polished Stainless; 5 Piece; OER
Highest quality reproduction on the market! Reproduction windshield molding set for 1967-69 Camaro and Firebird coupe models. This complete windshield molding set is designed to replace all 5 windshield moldings including the...
1967-69 Camaro, Firebird; Rear Window Molding Set; Coupe; Polished Stainless; 5 Piece Set
Highest quality reproduction on the market! Reproduction rear window molding set for 1967-69 Camaro and Firebird coupe models. This complete rear window molding set is designed to replace all 5 moldings including the upper...
1967-68 Camaro, Firebird; Front Fender Wheel Opening Molding; RH Passenger Side
Reproduction of the original wheel opening molding designed for use with 1967-68 Camaro and Firebird models. Each molding is manufactured to factory specifications replicating the original GM molding exactly. OER reproduction...
1967-69 Camaro / Firebird Coupe Lower Windshield Molding; RH
Reproduction of the original outer lower RH (passenger side) windshield molding designed for use on 1967-69 Camaro and Firebird coupe models. Each molding is designed to replace the damaged or dinged original. Each molding is...
1967-68 Camaro / Firebird Rear Wheel Well Molding; LH
Reproduction rear wheel opening molding for 1967-68 Camaro and Firebird models. Replace the dented, scratched or missing wheel opening molding with this authentic reproduction. OER® reproduction wheel opening moldings are...
1967-68 Camaro RS; Stage 3 Grill Kit; Grill, Moldings, Bezels, & Door Covers; Black
This Restorer's Choice™ grill kit includes a Rally Sport grill, upper and lower grill moldings, and LH and RH headlamp bezels and moldings and headlamp door covers. The upper molding includes the header panel to molding...
1967-68 Camaro RS; Stage 2 Grill Kit; Grill, Grill Moldings, Headlamp Bezels & Moldings; Blk & Chrm
This Restorer's Choice™ grill kit includes a Rally Sport grill, upper and lower grill moldings, and LH and RH headlamp bezels and moldings. The upper molding includes the header panel to molding attachment clips. The...
1967-68 Camaro RS; Stage 2 Grill Kit; Grill, Grill Moldings, Headlamp Bezels; Black
This Restorer's Choice™ grill kit includes a Rally Sport grill, upper and lower grill moldings, and LH and RH headlamp bezels and moldings. The upper molding includes the header panel to molding attachment clips. The...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1967 Chevrolet Camaro; Standard Front Grill; except RS Models
Reproduction of the original front grill designed for use on 1967 Camaro models with standard front end. Manufactured in quality injection molded ABS to factory specifications. This front grill is used with standard Camaros...
1967 Chevrolet Camaro; Lower Front Grill Molding; Standard Models; without RS Option
Reproduction of the original front lower grill molding designed for use on 1967-68 Camaro standard models (without hidden headlight option). Each molding is stamped to factory specifications including correctly painted black...
1967 Chevrolet Camaro; Upper Grill Molding; for Standard Models; without RS Option
Reproduction of the original front lower grill molding designed for use on 1967-68 Camaro standard models (without hidden headlight option). Each molding is stamped to factory specifications including correctly painted black...
1967 Chevrolet Camaro; Front Center Grill; with Rally Sport; Black
Reproduction front grill for 1967 Rally Sport models. Each grill is manufactured in injection molded ABS to original factory specifications. Features correct mounting points for a precise installation. Installs on 1967 models...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
Reproduction od the original rear window moldings for use with 1967-68 Chevrolet Impala SS 2-door hardtop (fastback) models. Manufactured in quality stainless steel to original factory specifications offering an original...
1965-67 Impala, Caprice 2-Door Hardtop; Windshield Molding Set; 5 Piece
Reproduction front windshield reveal molding set for 1965-67 Impala and 1966-67 Caprice models. Each molding is an exact replica of the original. Manufactured in polished stainless steel to factory specifications, each...
1966-67 Chevy II Nova; Rear Window Molding Set; 2 Door, Hardtop; 5 Piece Set
Reproduction of the original rear window molding designed for use with 1966-67 Chevy II / Nova 2 door hardtop models. Replicates the original configuration and appearance. This 5-piece molding set will replace the original...
1967 Camaro Standard Grill Kit with Headlamp Bezels
This Restorer's Choice™ grill kit includes a standard center grill assembly, left and right hand headlam p bezels along with the upper and lower moldings. Originally the moldings were riveted to the grill assembly. The...
1962-67 Chevy II Nova; Front Windshield Molding Set; 2 Door Sedan; 4 Piece Set
Reproduction of the original front windshield moldings designed for use on 1962-67 Chevy II and Nova 2-door sedan models. Each molding is designed to exact factory specifications and duplicates the original in quality, fit...
1967 Chevy II, Nova; Standard Front Grill; Aluminum Stamping; OER
Reproduction of the highly sought after 1967 Chevy II and Nova front grill assembly. Each grill is manufactured and stamped in quality aluminun stamping featuring the correct end contours that conform to the headlamp bezels....
1967-68 Chevy Pickup, Panel, Suburban; Grill Molding; Upper or Lower; Each
Reproduction of the original grill molding designed for use on 1967-68 Chevrolet pickup models. This rectangular molding is manufactured to factory specifications and replicates the original in fitment and appearance. Molding...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
1967-68 Camaro RS; Stage 1 Grill Kit; Grill and Grill Moldings Only; With Chrome Accents
This Restorer's Choice™ grill kit includes a Rally Sport grill and the upper and lower grill moldings. The upper molding includes the header panel to molding attachment clips. The moldings were originally riveted to the...
Reproduction rear window reveal molding set for 1966-67 Chevrolet Chevelle, Pontiac GTO, Tempest, LeMans, Buick Skylark, Gran Sport, and Oldsmobile 442, Cutlass, and F85 2-door hardtop models. Manufactured to factory...
1967 Camaro Standard Grill Kit without Headlamp Bezels
This Restorer's Choice™ grill kit includes a standard center grill assembly along with the upper and lower moldings. Originally the moldings were riveted to the grill assembly. The moldings must be attached to the grill...
Reproduction front windshield reveal molding set for 1964-65 GM A-Body models and 1964-67 Chevrolet El Camino. Each molding is an exact replica of the original. Manufactured to factory specifications, each molding will fit...
Reproduction front windshield reveal molding set for 1966-67 GM A-Body 2-door coupe or convertible models. Each molding is an exact replica of the original. Manufactured in polished stainless steel to factory specifications,...
1967 Chevelle, El Camino; Front Grill; SS and Custom Models
Reproduction front grill unit for 1967 Chevrolet Chevelle SS, El Camino Custom models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the original in quality,...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1967 Chevelle, Malibu, El Camino; Front Grill; Standard Models
Reproduction front grill unit for 1967 Chevrolet Chevelle, El Camino, and Malibu standard (Non-SS) models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the...
1967 Chevy II / Nova; Front Hood Lip Molding; OER
Quality reproduction hood lip molding for 1967 Chevrolet Chevy II and Nova models. This stamped aluminum molding is manufactured to factory specifications to ensure an original fit. Mounting hardware available separately....
1966-67 Chevy II, Nova; Outer Quarter Window Reveal Moldings; Pair;
Reproduction of the original quarter window trim moldings for use with 1966-67 Chevrolet Chevy II and Nova models. Each molding is manufactured in quality die-cast and features a chrome polished finish that will match right...
1967-72 Chevrolet, GMC Pickup Truck; Upper Tail Gate Molding; LH Driver Side
Reproduction LH upper tailgate molding for 1967-72 Chevrolet and GMC Pickup models. Each molding is manufactured in stamped aluminum offering an original appearance and fit. Attaches to the tailgate to the left of the...
Reproduction front windshield molding set for 1967-70 Chevrolet and GMC truck models. Each molding is manufactured in polished chrome to factory specifications replicating the original configuration for an authentic...
1967-68 Camaro / Firebird Standard Wheel Well Molding Set
Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1967-68 standard trim...
1968 Camaro RS; Grill Kit; Black with Silver Trim
The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1968 Rally Sport models included chrome horizontal trim on the edging which is included on this grill and...
1967-69 Camaro / Firebird Coupe Lower Back Glass Molding; RH
Reproduction of the original rear glass molding designed for use on 1967-69 Camaro and Firebird models. Installs on the passenger side lower back glass and meets the LH molding. Each molding will install easily using original...
1967-72 Chevrolet, GMC Pickup Truck; Lower Tail Gate Molding; Stamped Aluminum
Reproduction lower tailgate molding for 1967-72 Chevrolet and GMC Pickup truck models. Each molding is manufactured in stamped aluminum to correct factory specifications for a perfect fit and original appearance. Mounting...
1966-67 Chevy II, Nova; Front Wheel Opening Molding; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1966-67 Chevy II and Nova models. Each molding is manufactured to exact factory specs including correct contours and design. Manufactured using quality...
1967-68 Chevrolet, GMC Fleetside; Tailgate Molding Set; 5 Piece Set; Stock Tailgate Handle
Reproduction tailgate molding set for 1967-68 Chevrolet and GMC fleetside pickups. Each 5-piece set includes upper moldings and tail lamp corner moldings with molding clips required for installation. For tailgates with stock...
1967 Chevelle; Malibu; El Camino; Fender Tie Bar/Upper Grill Bar
Reproduction fender tie bar (also referred to as the upper grill bar) for 1967 Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, this panel installs between the fenders and...
1967-69 Camaro / Firebird Rear Window Side Molding; RH; Coupe
Reproduction of the original rear glass molding designed for use on 1967-69 Camaro and Firebird models. Installs on the passenger side back glass and meets the upper and lower molding. Each molding will install easily using...
1967-68 Camaro RS; Grill Kit; Black with Black Trim
The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1967 Rally Sport models featured an all-black grill and headlamp doors. If you want to restore your...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1967 Chevelle, Malibu, El Camino; Hood Lip Molding; With Hardware
Quality reproduction hood lip molding for 1967 Chevrolet Chevelle, Malibu, El Camino models. This stamped aluminum molding is manufactured to factory specifications to ensure an original fit. Mounting hardware is included.
1967-68 Impala; Back Glass Molding Clips; 17 Clip Set; Plus 5 Screws; 22-Pieces
Correct reproduction clips are now available for 1967-68 back glass moldings. When mounting the moldings on your 1967-68 full size Chevrolet, use the correct clips for a proper fit. Each set includes 17 clips, plus 5 screws....
1967 Chevrolet Chevelle, Malibu; Rear Tail Panel Molding; Lower
Reproduction rear tail lamp panel molding for 1967 Chevelle or Malibu models. Each molding is manufactured to factory specifications featuring the correct original factory design, appearance, and fitment. Comes complete with...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1967 Chevrolet Chevelle, Malibu; Rear Tail Panel Molding; Upper
Reproduction rear tail lamp panel molding for 1967 Chevelle or Malibu models. Each molding is manufactured to factory specifications featuring the correct original factory design, appearance, and fitment. Comes complete with...