Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1966-67 Pontiac Tempest, Lemans, GTO; Front Bumper; Chrome
Reproduction front bumper for 1966-67 Tempest, Lemans, GTO models. Each bumper is manufactured to OE factory specifications and features a bright chrome polished finish. {fitment}
Reproduction convertible top motor made to deliver consistent hydraulic pressure and dependable performance. Allows smooth raising and lowering of the power top. Each motor includes rubber mounts and features original style...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1963-67 Chevrolet, Oldsmobile, Pontiac; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge assembly for various 1963-67 GM models. Each hood hinge is manufactured from stamped steel to factory specifications assuring a quality replacement. Features correct mounting points for ease of...
1966-67 Buick, Chevy, Olds, Pontiac; Lower Door Hinge Detent Set; 4 Piece Set
Reproduction of the original lower door hinge roller and bolt for use with 1966-67 Buick Special, Pontiac GTO, Lemans, Tempest 1967 Camaro, Firebird, and other various models as listed. The rollers are manufactured in quality...
1966-1967 Camaro, Firebird, F85, GTO, LeMans; Upper Door Hinge; RH or LH; Each
Reproduction upper door hinge designed for various Buick, Chevrolet, Pontiac, and Oldsmobile models, including 1967 Camaro and Firebird. Each hinge is manufactured in heavy-duty steel to ensure long-lasting strength,...
1966-67 Camaro, Firebird, Chevelle, GTO; Lower Door Hinge; LH; Drivers Side; Various Models
OER® reproduction of the original lower door hinge designed for use on various 1966-67 GM models. Each hinge is manufactured from heavy-duty cast material, accurately replicating the original in both quality and design....
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1966-67 Tempest, Lemans, GTO; Inner Fender; Front; RH
Reproduction inner front fender skirt for 1966-67 Tempest, Lemans, GTO models. Manufactured in quality stamped steel replicating the original configuration for a perfect fit. Features EDP coating for rust prevention and...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
OER reproduction of the original front windshield glass for various 1966-67 Buick, Chevrolet, Pontiac, and Oldsmobile A-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
OER reproduction of the original front windshield glass for various 1966-67 Buick, Chevrolet, Pontiac, and Oldsmobile A-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
1963-69 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Windshield Wiper Motor; 1 Speed; Brand New
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
1966 Tempest, Lemans, GTO; Rear Bumper Bracket Set; 3 Pieces
Reproduction rear bumper bracket set for 1966 Tempest, Lemans and GTO models. This bracket set is manufactured in stamped steel and replicates the original in design, quality and fitment. Replace your original bent, rusted or...
1966-67 Tempest, Lemans, GTO; Front Bumper Bracket Set; 4 Pieces
Reproduction front bumper bracket set for 1966-67 Tempest, Lemans and GTO models. This bracket set is manufactured in stamped steel and replicates the original in design, quality and fitment. Replace your original bent,...
Reproduction door vent glass frame for 1966-67 GM A-Body coupe and convertible models (except El Camino). Manufactured to factory specifications featuring a polished chrome plated finish as original. This frame surrounds the...
Factory-style reproduction front door latch assembly for various GM models. Engineered to original specifications to restore smooth, positive latching and proper door alignment, this complete assembly replicates the factory...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass to factory...
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass to factory...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Sedan models. Manufactured in smoke gray tinted glass to factory specifications for a...
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Sedan models. Manufactured in smoke gray tinted glass to factory specifications for a...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
Factory-style reproduction front door latch assembly for various GM models. Engineered to original specifications to restore smooth, positive latching and proper door alignment, this complete assembly replicates the factory...
This premium reproduction LH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style smoke gray tinted...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in light green tinted glass to factory...
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Sedan models. Manufactured in light green tinted glass to factory specifications for a...
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in light green tinted glass to factory...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Sedan models. Manufactured in clear glass to factory specifications for a precise fit....
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Sedan models. Manufactured in light green tinted glass to factory specifications for a...
1959-76 GM; Convertible Top Boot Silde Rail Retainer; with 8 Mounitng Holes
Reproduction of the original style convertible top boot retainer for 1959-76 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models (except Camaro, Firebird). The top boot will slide into this retainer in order to hold...
1964-67 GM A-Body; Convertible Top Hydraulic Hose Set; with Power Top; White Hose
Reproduction of the original hydraulic hose set designed for use with 1964-67 GM A-body convertible models as listed. Original hoses for these early convertibles are nearly impossible to find, making this reproduction set the...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile convertible models. Manufactured in quality zinc die-cast metal, each...
1964-67 GTO, 1966-67 Chevelle, Skylark, Cutlass; Door Window Regulator; Manual; LH
Reproduction window regulator for 1964-67 GM A-body models with manually operated door windows. Each regulator is manufactured to replicate the original in quality and design. The latest manufacturing methods are employed to...
1964-67 GTO, 1966-67 Chevelle, Monte Carlo, Skylark, Cutlass; Door Window Regulator; Manual; RH
Reproduction window regulator for 1964-67 GM A-body models with manually operated door windows. Each regulator is manufactured to replicate the original in quality and design. The latest manufacturing methods are employed to...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 GM convertible models. Manufactured in quality zinc die-cast metal, each knuckle is built to OE factory specifications for...
This premium reproduction RH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in clear glass to factory...
This premium reproduction RH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style green tinted glass...
This premium reproduction LH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style green tinted glass...
This premium reproduction RH vent glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile F-85/Cutlass, and Pontiac Tempest 2 Door Sedan (Coupe with post) models. Manufactured in smoke gray tinted glass to factory...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1966 Pontiac GTO, LeMans; Front Bumper Filler; LH (Driver Side)
Reproduction 1966 Pontiac GTO/LeMans lower fender to bumper filler for the right hand side. This is the filler that fills the gap between the bumper and the fender for the left hand side(driver side). Paint to match...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...