Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1960-68 Mustang, Falcon, Comet; Fuel Tank Sending Unit; w/o Low Fuel Warning; 3/8" Pipe; Zinc Plated
The most accurate reproduction fuel tank sending unit in the industry. Features the original design including a brass float, O ring, and filter that replicate the original in appearance and functionality. This unit monitors...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1964-68 Ford Mustang; Fuel Tank Sending Unit; without Low Fuel Warning; 5/16"
Reproduction fuel tank sending unit for 1964-68 Ford Mustangs and other various models. The most accurate reproduction fuel tank sending unit in the industry, with original design brass float and filter. This unit monitors...
1964-66 Ford Mustang; Fuel Filler Neck Assembly; for Fuel Tank
Reproduction fuel filler neck for 1964-66 Ford Mustang. Each neck is manufactured to correct factory dimensions and features a zinc coating for rust and corrosion prevention. The fuel tank neck mounts to the tail light panel...
1966 Ford Galaxie, Custom, LTD; Fuel Tank Filler Neck Pipe; for 25 Gallon Tank
Reproduction fuel filler neck pipe for 1966 Ford Galaxie and full size passenger car models. Connects with a fuel filler hose (sold separately) to the fuel tank. Replacing the filler neck is recommended whenever you replace...
1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models
Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1960-64 Falcon, 1960-63 Comet, 1961-67 Econoline; Fuel Tank Sending Unit
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1966-71 Fairlane Station Wagon, Torino Station Wagon; Fuel Tank Sending Unit; 3/8" Line
Reproduction fuel level sending unit for various Fairlane and Torino wagon models. This direct fit replacement features a brass float, locking ring, and O-ring. Replaces Ford Part # C6OZ-9275-D, or D0OZ-9275-J. Fitment...
Reproduction fuel level sending unit for 1966-69 Ford Fairlane, 1968-69 Torino and 1966-69 Mercury Comet models with 3/8" inlet. This direct fit replacement includes the NBR float, locking ring, and O-ring. Does NOT fit...
1966-96 Ford, Mercury; Lower Fuel Tank Filler Pipe Seal; Various Models
Reproduction of the original fuel tank to filler pipe seal designed for use on various1966-97 Ford and Mercury applications. Each seal is manufactured to correct factory specifications and replaces the old or missing original...
1967-72 Ford F100, F250, F350 Pickup Truck; Fuel Tank Filler Neck; Black
Reproduction fuel tank filler neck for 1967-1972 Ford F100, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black EDP coating for premium rust and...
1966-76 Ford Bronco; Rear Main Fuel Tank Mounting Strap; Each
Reproduction of the original style side mount gas tank strap designed for use with 1966-1976 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
1966-69 Ford; Filler Neck-to-Body Sealing Gasket
Gas tank filler neck-to-body sealing gasket. Made of rubber, this gasket sits behing the filler neck flange to cushion the fuel filler where it mounts to the body of the car. Fits various 1966-69 Fairlane, Falcon, and...
1964-72 Ford Truck; Fuel Tank Insulation; 2-Piece Set
Reproduction rubber fuel tank insulator set for 1964-72 Ford truck with cab mount fuel tank behind the seat. Dense die cut rubber material features adhesive on one side for convenient installation on tank. Helps to eliminate...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1966-76 Ford Bronco; Gas Tank Pipe Filler Guard Set
Reproduction gas tank filler pipe guard set for 1966-76 Ford Bronco. These panels install in the driver side inner quarter area and cover the filler pipe that extend through the bedfloor and out the quarter panel. They are...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1965-73 Ford Mustang; Screw Set; Gas Tank Mounting; 13 Piece Set
This 13 piece set contains all the mounting hardware needed to install your gas fuel tank. Each piece is factory correct. Screws and bolts are all fabricated from heavy-duty steel and coated to prevent any corrosion. Ford...
1964-70 Ford/Mercury; Wire Clamps; For Fuel Filler Neck Hose
Reproduction wire-style fuel tank filler neck clamps for 1964-70 Mustang, 1967-70 Cougar and 1966-70 Fairlane models. If your hose is loose, the filler neck clamps could be worn out and require replacing. These clamps are...
1966-76 Ford Bronco; Fuel Tank Filler Pipe; For Auxiliary (side) Tank
Reproduction of the front auxiliary fuel tank filler pipe for 1966-76 Ford Bronco models. Replacing the filler neck is recommended whenever you replace your gas tank. This is where the gas cap attaches. After years of use and...
Stainless steel reproduction of the fuel tank sending unit featuring the original design with a brass float, O-ring, and filter that replicate the original in appearance and functionality. This unit monitors the fuel level in...
1966-76 Ford Bronco; Fuel Tank Sending Unit; Auxiliary Tank 3/8"; with Lock Ring and Seal
Reproduction of the original auxiliary gas tank fuel tank sending unit designed for use with 1966-76 Ford Bronco models. This sending unit installs in the forward fuel tanks. Includes lock ring, O-ring seal, and strainer....
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1966-69 Fairlane, Torino, Comet; Fuel Tank Sending Unit; 5/16" Fitting; except Sation Wagon
Reproduction fuel level sending unit for 1966-69 Ford Fairlane, 1968-69 Torino and 1966-69 Mercury Comet models with 5/16" inlet. This direct fit replacement includes the NBR float, locking ring, and O-ring. Replaces Ford...
1966-1977 Ford Bronco; Auxiliary Fuel Tank Mounting Straps; Pair
Reproduction of the original style rear mount gas tank straps designed for use with 1966-1977 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
1964-69 Ford Mustang; Hex Head Screw Set; For Fuel Filler Neck; 5 Piece Set
Reproduction fuel filler neck screw kit. Each 5 piece screw kit includes the hex head screws that are required to mount the fuel filler neck to the tail lamp panel on 1964-69 Mustang models. #10 x 1/2" Lg Tapping Screw with...
1966-76 Ford Bronco; Fuel Sending Unit; Rear Main Tank 3/8"; with Lock Ring & Seal
Reproduction of the original main fuel tank fuel level sending unit designed for use with 1966-76 Ford Bronco models. This sender installs in the rear main tank and will work with either stock steel or replacement poly fuel...
1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models
Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
1965-72 Ford F-100, F-250 Truck; 2WD, 4WD; In-Cab Fuel Tank Mounting Plates
Reproduction fuel tank bracket set for various 1961-72 Ford F-Series Pickup Truck models with in-cab fuel tanks. These brackets attach to the cab floor and prevents forward and backward movement of the fuel tank. Fitment...
1966-1977 Ford Bronco; Fuel Tank J-Bolt Set; Each
Reproduction fuel tank J-Bolt with two nuts and a lock washer for 1966-1977 Ford Bronco models. Each j-bolt is manufafactured in stamped steel and chrome plated to correct factory dimensions. Sold individually.
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1964-73 Ford/Mercury; Fuel Tank Filler Pipe Neck To Body Gasket
Reproduction of the original gas tank filler neck gasket for 1964-73 Mustang and 1967-68 Cougar models. The fuel tank-to-body gasket will ensure a leak free seal between your filler neck and gas tank. Replaces OE # C5ZZ-9076....
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1964-67 Mustang, Falcon, Cougar, Comet; Fuel Tank to Filler Pipe Hose; Nitrile 70 Shore;
Reproduction fuel filler hose that seals the inlet filler neck to the fuel tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1961-77 Ford F100, F150, F250, F350 Pickup Truck; Fuel Tank Sending Unit; with Gasket, Float
Reproduction of the original main gas tank fuel level sending unit designed for use with 1961-77 Ford F-100, F-250, F-350 truck models. This sending unit installs in the original fuel tank inside the cab. Includes gasket and...