Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1965-67 Impala, Bel Air, Chevy II, Nova, Camaro; "327" Front Fender Emblem; Each; GM Licensed
Reproduction of the original front fender emblem designed for use on various 1965-67 GM models. Each emblem is manufactured to exact factory specifications in zinc die-cast metal featuring a bright polished chrome finish....
1966 Chevrolet; "CHEVY II" Front Grill Emblem
Reproduction of the original "CHEVY II" front grill emblem designed for use on all 1966 Chevrolet Chevy II models. This beautiful reproduction is manufactured in die-cast zinc replicating the original in quality and...
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1964-72 GM; Rear End Positraction Tag; Red; 3/4"
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
1964-81 GM; Rear End Positraction Tag; Red; 12 Bolt; 1" Tag
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1964-67 Camaro, Impala, Nova; Chevelle; "V-Flag" Front Fender Emblem; Each; GM Licensed
Reproduction of the original V-Flag front fender emblem for use with various 1964-67 Chevrolet models as listed. Each emblem is manufactured to factory specifications in die-cast zinc offering originality and authenticity....
1965-67 Nova, Impala, Caprice, 1967 Camaro; "350" Front Fender Emblem; Each; GM Licensed
Reproduction of the original "350" front fender emblem designed for use on 1965-67 Nova, Impala, Bel Air, Biscayne, Caprice, and 1967 Camaro SS models. Each emblem is manufactured in die-cast zinc replicating the original...
1966-67 Chevrolet; "Chevy II Nova" Quarter Panel Emblems; with Hardware; Pair; GM Licensed
Reproduction of the original "Nova"quarter panel emblem designed for use on 1966-67 standard Chevy II Nova quarter panels. Manufactured in quality die-cast zinc metal to original factory specifications featuring a brightly...
1966-67 Chevy Nova; "Super Sport" Quarter Panel Emblem; Each; GM Licensed
OER® reproduction of the original "Super Sport" quarter panel emblem designed for use on 1966-67 Nova SS models. Manufactured in quality zinc die-cast metal to OE dimensions featuring a beautiful chrome finish and black...
1958-72 Chevrolet; "383 Crossed Flags" Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1966 Chevy Nova; SS Grill Emblem ; with Hardware; GM Licensed
Reproduction of the original SS grill emblem designed for use on all 1966 Nova models with the Super Sport option. Manufactured in quality die-cast zinc metal replicating the original in quality fitment and appearance....
1964-79 Chevrolet; "454 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this early-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1966-67 Chevy II; Door Panel Emblems ; Pair
Reproduction of the original interior door panel emblems designed for use with 1966-67 Chevrolet Chevy II models. Each emblem is manufactured in quality die-cast zinc featuring correct "Chevy II" wording with a vertical red...
1965-67; Impala, Camaro, Chevy II, Nova, Chevelle; 283 Front Fender Emblem; GM Licensed
Reproduction of the original front fender emblem designed for use on various 1965-66 GM models. Each emblem is manufactured to exact factory specifications in zinc die-cast metal featuring a bright polished chrome finish....
1963-72 Chevrolet; "427 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1963-72 Chevrolet; "502 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1964-89 GM; Rear Axle ID Tag; Various Models
Reproduction limited slip rear axle ID tag that ensures the correct type of gear oil is added to the rear end. This tag was mainly used with 1964-89 GM models indicating the proper lubrication requirement. Attaches to the...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1962-67 Chevy II, Nova; Full Outer Rocker Panel; 2 Door; LH; EDP Coated
Reproduction of the original complete rocker panel designed for use on 1962-67 Chevy II Nova 2 door models. Manufactured in stamped steel to original factory configuration, this OE style full outer rocker panel will replace...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1964-67 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Aqua; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1964-67 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1962-67 Chevy II, Nova; Full Outer Rocker Panel; 2 Door; RH Passenger Side; EDP Coated
Reproduction of the original complete rocker panel designed for use on 1962-67 Chevy II Nova 2 door models. Manufactured in stamped steel to original factory configuration, this OE style full outer rocker panel will replace...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
1965-70 Chevrolet; 375 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 450 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 400 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
1965-73 Chevrolet; 425 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1983-1988 Chevrolet Wheel Center Cap Emblem; with N90 Option
Reproduction wheel center cap emblem for various 1983-88 Chevrolet models. Each emblem was originally part of the N90 wheel option for various 1983-88 Chevrolet models. Measures 2-1/4" in diameter. Sold individually. To...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...