Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Front Sway Bar...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side
Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...
1964-72 GM A-Body; Rear Control/Trailing Arms; Lower; With Original Style Rubber Bushings; LH and RH
Reproduction rear lower trailing arms for 1964-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...
Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar fits a wide variety of models including Buick Skylark, Special, Chevrolet Chevelle El Camino,...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; RH Passenger Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; LH Driver Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each
Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...
1964-74 GM; 2" Drop Spindles; with Disc Brakes; RH and LH; Pair
Reproduction of the original style 2" drop spindles for various 1964-72 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models. These 2" drop spindles will replace OE single piston disc brake spindles. The stock...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...