1965 Chevy II Nova; Front Grill Assembly; with Pre-Installed Mounting Brackets; OER
Reproduction of the original front grill designed for use with 1965 Chevy II Nova models. Manufactured in correct quality aluminum stamping, each grill is designed to replace the original exactly. Each grill features the...
1965 Chevy II / Nova; Fender Eyebrow Moldings; Pair
Reproduction of the original front eyebrow moldings designed for use with 1965 Chevrolet Chevy II and Nova models. These moldings are manufactured in quality stamped aluminum replicating the original GM moldings. This molding...
1962-67 Chevy II Nova; Front Windshield Molding Set; 2 Door Sedan; 4 Piece Set
Reproduction of the original front windshield moldings designed for use on 1962-67 Chevy II and Nova 2-door sedan models. Each molding is designed to exact factory specifications and duplicates the original in quality, fit...
1962-65 Chevy II Nova; Upper Trunk Cove Molding
Quality reproduction 1962-65 Chevy II and Nova upper trunk cove molding. Moldings are manufactured in stamped aluminum replicating the original in appearance and fit. Replace your dented or missing cove moldings and restore...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1965 Chevy II Nova; Grill Mounting Bracket Set; 5 Piece Set
Reproduction of the original grill brackets designed for use with all 1965 Chevrolet Chevy II Nova models. Each bracket is manufactured in stamped steel to correct factory specifications. Brackets are designed to work with...
1965 Nova SS; Fender & Quarter Molding Clip; Plastic, Push-In; Each
Reproduction of the original plastic clip designed to attach the lower side moldings on 1965 Nova Super Sport models. These clips are used with the molding along the bottom edge of the front fender and the front of the...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1965 Nova SS; Door and Quarter Panel Molding Clip Set Of 4 Plastic Screw In Clips
Reproduction door molding plastic clip set that attaches at each end of the door molding on 1965 Nova Super Sport models. Each clip is an injection molded reproduction of the original. One screw-in clip is necessary at each...
1965 Chevrolet Chevy II Nova Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1962-67 Chevy II Nova; Front Windshield Molding Set; 2 Door; Hardtop, Convertible; 4 Piece Set
Reproduction of the original front windshield moldings designed for use with 1962-67 Chevy II Nova 2-door hardtop and convertible models. Designed to exact factory specifications, each duplicates the original exactly for an...
1962-65 Chevy II / Nova; Outer Trunk Cove Molding; Pair
Quality reproduction of the outer trunk cove moldings for all 1962-65 Chevy II/Nova models except wagon. Reproduced to exact OE specifications for a perfect fit and original appearance. Fits hardtop, sedan and convertible...
1962-65 Chevy II Nova; Roof Drip Molding Set; 2 Door, Hardtop, Coupe; 4 Piece Set
Reproduction of the original roof drip moldings designed for use on 1962-65 Chevy II and Nova 2 door hardtop models. This 4-piece set will replace your original drip rail moldings exactly. Designed to original factory...
1965 Nova SS; Door & Quarter Panel Molding Clip Set of 16; Plastic Push In
Reproduction plastic clips used to attach the Super Sport door and quarter side moldings on 1965 Nova SS models. Use with the molding along the bottom edge of the door and the quarter panel above the rocker panel. You will...
1962-65 Chevy II, Nova; Upper Door Ledge Reveal Molding Clips; 8 Piece Set
A reproduction clip that attaches the upper side / door ledge reveal molding on 1962-65 Chevy II Nova coupe models. Manufactured from high quality die cut stamped steel made to original GM specifications. Each piece is black...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1965 Nova SS; Door Molding End Clip; Plastic Screw-In Type
Reproduction door molding plastic clips that attach at each end of the door molding on 1965 Nova Super Sport models. Each clip is an injection molded reproduction of the original. One screw-in clip is necessary at each end of...
1962-67 Chevy II, Nova; Upper Trunk Cove Molding Clip Set; Clips, Nuts, Washers
Reproduduction of the original trunk molding clips designed for use with 1962-67 Chevy II and Nova models. Each clip is manufactured to factory specifications for an authentic appearance and fitment. Includes 6 each clips,...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1962-87 GM; Wheel Well Molding Screw Set; Phillips; 8-18 x 3/8" L; 3/8" Head; Silver; 36 Piece Set
Reproduction of the original style screws designed for use with various GM models. This screw set can be used for all four wheel opening moldings. Replace your missing or worn out wheel well molding screws with this 36 piece...
1958-72 GM Retaining Screw; #8- 18 x 1/2"; Various Applications
Reproduction of the original retaining screw designed for use with a variety of different vehicles and fitments. Screw used to attach the headlamp retaining ring (secure the bulb) to the headlamp bucket on GM vehicles with 7"...
1965 Nova SS; Quarter Panel Peak Molding Clip Set; 22 Stamped Steel Clips; RH & LH; 22 Piece Set
Reproduction stamped steel clips designed to attach the quarter panel peak moldings on 1965 Nova Super Sport models. Each kit includes 22 clips and plastic retainer nuts, providing everything needed to install both the LH and...
1962-65 Chevy II, Nova; Rear Wheel Opening Molding; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1965-65 Chevy II and Nova models. Each molding is manufactured to exact factory specs including correct contours and design. Manufactured using quality...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1965 Chevy II Nova SS; Quarter Panel Peak Molding Clip; For Rear Vertical Extension Molding; Each
Reproduction steel push-in molding clip used to secure the rear quarter panel peak molding vertical extensions on 1965 Nova Super Sport models. The vertical peak molding extension is the molding at the rear of the quarter...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1965 Chevy II, Nova; Front & Center Quarter Panel Peak Molding Clip; Each
Reproduction steel molding clip and plastic nut used to attach the upper quarter panel peak moldings on 1965 Nova Super Sport models. Each clip and nut set is manufactured to OE specifications for a precise fit and proper...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1962-65 Chevy II / Nova; Windshield & Rear Window Moulding Clip
Reproduction of the original stamped steel molding clip designed for use on various GM models including 1962 Corvair, and 1962-65 Chevy II and Nova coupe models. Each clip provides for a snug fit for the molding as original....
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
1962-65 Chevy II, Nova; Rear Window Molding Clip Kit; Coupe; 28 Piece Kit
Reproduction of the original style clips designed for use with 1962-65 Chevy II and Nova coupe models. Clip are manufactured to replicate the original design and allow installation of the rear window moldings. Each clip will...
1962-65 Chevy II, Nova; Front Wheel Opening Molding; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on 1965-65 Chevy II and Nova models. Each molding is manufactured to exact factory specs including correct contours and design. Manufactured using quality...
1962-65 Chevy II, Nova; Front Wheel Opening Molding; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1965-65 Chevy II and Nova models. Each molding is manufactured to exact factory specs including correct contours and design. Manufactured using quality...
1962-65 Chevy II, Nova; Rear Wheel Opening Molding; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on 1965-65 Chevy II and Nova models. Each molding is manufactured to exact factory specs including correct contours and design. Manufactured using quality...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...