1964-66 Mustang; Deluxe Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1964-70 Mustang, Cougar; Rear Sway Bar Kit; 3/4" Diameter
Replacement 1? O.D. rear sway bar set for 1964-70 Mustang and 1967-70 Mercury Cougar models. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. Kit includes 3/4" diameter...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 39-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1961-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Lower Control Arm Assembly; LH Or RH
Reproduction from lower control arm and ball joint assembly for various 1961-66 Ford and Mercury vehicles including Mustang, Falcon, Ranchero, and Comet. This control arm assembly is a direct fit replacement and includes the...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1964-66 Ford Mustang; Outer Shock Tower; LH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die-stamped 16 gauge steel with a stronger 14 gauge inner support welded in place.
1964-66 Ford Mustang; Outer Shock Tower; RH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die-stamped 16 gauge steel with a stronger 14 gauge inner support welded in place.
1964-77 Mustang, Falcon, Cougar, Comet; Upper Ball Joint; 3-Bolt ; RH or LH; Each; Various Models
Reproduction of the original style 3-bolt upper ball joint designed for use with various 1964-77 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. This ball joint attaches to the upper control arm and...
1964-66 Ford Mustang; Shock Tower Patch Panel; LH Or RH
This OER® Authorized panel is needed to repair the lower shock towers where they attach to the frame rail. Made in USA Sold individually. Fits left hand (driver side) or right hand (passenger side). Application Notes: May...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1964-70 Mustang, Cougar; Crossmember Kit; Weld-In Mustang II Suspension Upgrade
Weld-in conversion kit designed for weld-in installation on 1964-70 Mustang and Cougar models. Improve your ride, handling, and performance with this unique Mustang II crossmember kit that converts the antiquated stock front...
1964-66 Mustang; Standard Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1963-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Upper Control Arm Assembly; LH Or RH
Front upper control arm assembly for Various 1963-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1964-66 Ford Mustang; Shock Tower Top Cap; LH Or RH; Black
1964-66 Mustang stamped steel front shock tower top cap. Simple bolt-on installation. Comes in black. Sold Individually. Two required per vehicle. Note: We highly recommend using a thread-chasing tool to clean paint out of...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...