1964-68 Mustang, 1967-68 Cougar; Windshield Molding Set; Coupe/Fastback; 5 Piece Set
Reproduction of the original windshield molding set designed for 1964-68 Mustang coupe and Fastback models, and 1967-68 Cougar coupe models. This reproduction is manufactured in stainless steel as original. This 5-piece...
1964-68 Ford Mustang; Coupe; Roof Rail Moldings
Reproduction of the original style roof rail moldings designed for use with 1964-68 Mustang coupe models. Worn, dented and unsightly drip rail moldings can now be replaced with new highly polished stainless steel reproduction...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1964-66 Ford Mustang; Hood Lip Molding; with Hardware
Reproduction hood lip molding for 1964-66 Mustang. Mounts on the edge of the hood above the grille. Produced in highly polished stamped aluminum as original, this finely crafted hood lip molding adds the finishing touch to...
1964-65 Mustang; Front Grill Assembly; Standard Models w/o Fog Lamps; Black - Paint-to-Match
Reproduction of the original front grill assembly designed for use with 1964-65 Ford Mustang models. Each grill is manufactured to OE specifications replicating the original in quality and design. The grill features a...
1964-66 Mustang; Rocker Panel Molding; With Hardware; LH, Driver Side
10182F. For replacement end clips see part # href="http://www.oerparts.com/shop/search/?q=10182B">10182B.
1964-66 Ford Mustang; Vinyl Top Back Belt Side Molding; Chrome
Reproduction chrome outside back belt side mouldings for 1964-66 Mustangs with factory vinyl top. Theey are accurately designed to the factory dimensions, use the original mounting points and include hardware. Sold in pairs....
1964-66 Mustang; Rocker Molding Installation Clip Set; Per Side
Reproduction of the original style mounting clips used to attach the rocker panel moldings to the rocker panels on 1964-66 Mustangs. Each set includes correct replacement clips and rivets for one side of your Mustang. Sold...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Windshield Molding; RH
Reproduction of the original front vertical windshield molding for 1964-68 Mustang coupe and fastback models, and 1967-68 Cougar coupe models. Manufactured to exact factory specifications in polished stainless steel as...
1964-66 Ford Mustang; Rocker Molding End Clip; 2 Per Side
Original style rocker molding end clip for 1964-66 Mustangs. This clip is used to install the lower rocker panel moldings. Each clip is designed to fit original or reproduction rocker panel moldings. Sold individually. 2...
1964 Ford Mustang Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1964-66 Mustang; Rocker Panel Moldings; with Hardware; Pair
Reproduction of the original rocker panel moldings designed for use on 1964-66 Mustangs. Each molding is manufactured in aluminum to exact factory specifications offering a perfect fit and original appearance. Installs along...
1964-66 Ford Mustang; Aluminum Grille Opening Molding; LH
Reproduction aluminum molding, features polished edges with the correct silver center strip and clips are included. This grille molding follows the contour from the headlight to the center of the lower grille area....
1964-66 Ford Mustang; Aluminum Grille Opening Molding; RH
Reproduction aluminum molding, features polished edges with the correct silver center strip and clips are included. This grille molding follows the contour from the headlight to the center of the lower grille area....
1964-65 Ford Mustang; Front Grille Bar Set; Without Fog Lamps
Restorer's Choice reproduction Grille Bar set designed for use with 1964-65 Mustangs, Each bar is manufactured in pressure die-cast for precision, superb appearance, and a perfect fit. Superior plating quality and durability,...
1964-66 Mustang; Rocker Panel Molding; with Hardware; RH, Passenger Side
10182F. For replacement end clips see part # href="http://www.oerparts.com/shop/search/?q=10182B">10182B.
1964-66 Ford Mustang; Grille Opening Molding Joint Cover; Die-cast
Reproduction of the original style grill joint cover to connect the lower two portions of the grille opening panel offering a finished appearance. Each joint cover is manufactured in die-cast zinc, finished in argent silver...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Lower Windshield Molding
Reproduction of the original lower windshield molding for 1965-68 Mustang and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original. Applications: 1964-1968 Ford Mustang...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Upper Windshield Molding; LH
Reproduction of the original upper windshield molding for 1964-68 Mustang coupe, 1965-68 Mustang Fastback, and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original....
1964-68 Ford Mustang/1967-68 Mercury Cougar; Coupe/Fastback; Upper Windshield Molding; RH
Reproduction of the original upper windshield molding for 1964-68 Mustang coupe and Fastback models, and 1967-68 Cougar models. Manufactured to exact factory specifications in polished stainless steel, as original....
1964-68 Mustang Coupe; Rear Window Molding Clip Kit; 19-Pieces
When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1964-66 Mustang coupe models. {specs} {fitment}
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1964-66 Ford Mustang; Rocker Molding End Clip; 4 Per Side
Original style center position rocker molding clip for 1964-66 Mustangs. This clip is used to install the lower rocker panel moldings. Each clip is designed to fit original or reproduction rocker panel moldings. Sold...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1964-66 Mustang; Lower Grill Bar Support; EDP Coated; Economy
Economy reproduction of the original lower grille bar support for 1965-66 Mustangs. This support is located under the grille opening moldings and installs behind the front bumper to add support to the grille. Connects the...
1964-65 Mustang; Center Pony-and-Corral Grille Ornament Retainer
Reproduction stamped steel retainer for the Pony-and-Corral Ornament in the center of the grille on 1964-65 Mustang models. Produced in stamped steel and finished in black. Latch top plate gets mounted to the hood latch...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
1965?66 Mustang; Hood Latch and Grille Support Brace; OE-Style Reproduction
Reproduction stamped steel hood latch and grille support brace designed for use with 1965?1966 Ford Mustang models. This brace provides structural reinforcement for both the hood latch and the grille, ensuring proper...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
1964-65 Ford Mustang; Side Scoop Quarter Panel Ornaments; With Hardware
Die-cast chrome plated metal. Simulated side scoops are one of the visual moldings that define a 1964-65 Mustang. These are located on the front of the quarter panels on your Mustang. Removal of the interior quarter trim may...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
1964-68 Mustang Windshield and Rear Window Molding Clip Set ; 12 Piece Set
Reproduction of the original style windshield molding clips designed for use on 1965 Mustangs. These clips will mount the molding and screw into position. For use on various front windshield moldings. 12 piece set. Use as...
1964-68 Mustang 12 Piece Windshield Molding Clip Screw Set
Replacement screws for 1964-68 windshield molding clips that use screws to mount to the body. This is a set of 12 screws.
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...