Reproduction front windshield reveal molding set for 1964-65 GM A-Body models and 1964-67 Chevrolet El Camino. Each molding is an exact replica of the original. Manufactured to factory specifications, each molding will fit...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1964 Chevrolet Malibu Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1962-1976 GM; Rocker Panel Molding Retainer; Each
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1964 Chevelle, El Camino, Malibu; Front Grill; Aluminum
Reproduction front grill unit for 1964 Chevrolet Chevelle, El Camino, and Malibu models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the original in quality,...
1964-65 Chevelle, Malibu 2-Door Coupe; Roof Drip Rail Molding Set; 6-Pieces
Reproduction roof drip moldings for 1964-65 Chevelle and Malibu 2-door coupe models. Each molding set is manufactured in stamped aluminum to OE specifications and will replace the old, damaged, or missing originals. Sold in...
1964 Chevelle, El Camino, Malibu; Hood Lip Molding
Reproduction hood lip molding for 1964 Malibu, Chevelle, and El Camino models. Each molding is stamped from high grade aluminum replicating the original molding. Features polished anodized finish for an authentic appearance....
1964-71 Chevrolet; Rear Glass Molding Clip Set; Square Style; 24 Piece Set
OER®replacement rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model. For individual clips (1), refer to part...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
Reproduction front windshield and back window molding retainer clip set for a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is required. Each clip...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set
Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...
Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated, 10 piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 5/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 1" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Push Pin Retainer; 5/8" Diameter Head; For 1/4" Hole; Each
Reproduction push-pin style retainer for various Ford models including 1970 Mustang models to fit the grill to the headlamp bracket among other uses. Use wherever a 5/8" head diameter push-pin type fastener is required. Fits...
Molding Clip Retaining Pal Nut, #8-32 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"
Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...