OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1963-64 Impala, Bel Air, Biscayne; Rubber Stopper Kit; 16 piece set
Reproduction of the original style rubber stoppers designed for use on 1963-64 Chevrolet Impala, Bel Air, and Biscayne models. Achieve a clean tailored appearance of your Chevrolet's body panels by replacing the old or worn...
1963-64 Impala, GM Full-Size; Roof Rail Weatherstrip; 2 Door Hardtop; Pair; Various Models
Correct reproduction of the original roof rail weatherstrips designed for use on 1963-64 Impala and GM Full Size 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
1963-64 Impala, Electra, Wildcat; Door Frame Weatherstrip Seal; 2-Door Hardtop; Convertible, Pair
Quality reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1963-64 Impala and GM full size 2 door hardtop and convertible models. Manufactured in the correct configuration...
Reproduction back glass weatherstrip seal designed for various GM 2-door hardtop models including 1962-64 Impala, and Buick, Oldsmobile, and Pontiac 2-door pillarless coupe (non-post) cars. Will not fit sedan models with...
1961-64 Impala; Bel Air; Biscayne; Steering Column to Firewall Seal, with Automatic Transmission
Reproduction steering column floor seal for 1961-64 Impala, Bel Air and other GM full size models. Each seal is designed to replace the original and includes correct mounting points for installation. Manufactured from...
1963-64 Impala; Vent Window Weatherstrip Set; 2 Door ; Hardtop, Convertible; Pair
Reproduction vent window weatherstrip for 1963-64 Impala 2-door hardtop and convertible models. Manufactured in quality EPDM rubber to factory specifications replicating the original in appearance and fitment. Features an...
Exact reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1961-62 Buick, Chevrolet, Pontiac, and Oldsmobile Full-Size 2 door sedan models. Manufactured in the correct...
1937-80 GM, 1961-64 Impala, 1964-72 El Camino; Gas Door Bumpers; 1937-58 1-prong Door Bumpers; Pair
Correct reproduction rubber bumper for various GM applications. Fits: 1937-1958 GM full size vehicle door bumper, single prong style, front or rear. 1961-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1957-70 Buick, Cadillac, Chevy, Pontiac, Oldmobile; Trunk Weatherstrip; Various Full Size Models
Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1961-64 Impala, 1962-63 Chevy II / Nova; Door Jamb Rubber Seals; U-Shape; Convertible, Pair
Correct reproduction of the of the original U-shaped rubber door jamb rubber seals designed for use on 1961-64 GM Impala and 1962-63 Chevy II / Nova convertible models. Each U-shape seal is manufactured to original...
1963-64 Chevrolet Impala; Upper Vent Window Rubber Bumpers; Hardtop
Reproduction upper vent window bumpers for 1963-64 Chevrolet Impala hardtop models. The bumpers are manufactured in EPDM rubber replicating the original GM design for an authentic appearance and fit. Installs in the upper...
1955-81 Chevrolet, GMC, Pontiac; Air Cleaner Lid Rubber Seal; 59" Long x 5/16" Wide
Reproduction air cleaner lid seal for a variety of GM car and truck models as listed. Designed to seal the area between the lid and the base offering a tight seal for the air cleaner on models that required this seal. {specs}...
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1963-65 Chevy; Door Mirror Gasket; LH or RH; Various Models
Quality reproduction of the original outer door mirror gasket designed for use on various GM models. Manufactured to factory specifications in quality injection molded ABS, will fit original GM or reproduction mirrors....
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1962-66 Chevrolet; Door Rubber Bumper Set; 4 Piece Set; Various Models
Replacing the rubber door stoppers will help keep your doors aligned correctly while adding a factory fresh appearance to the vehicle. Each rubber bumper is designed and manufactured to exact OE specs. Manufactured in quality...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1961-64 Impala, 1961-62 Bel Air; U Shape Door Jamb Rubber Seals, with Screws; Pair
Correct reproduction of the of the original U-shaped rubber door jamb rubber seals designed for use on 1961-64 GM Impala 2 door hardtop models. Each U-shape seal is manufactured to original specifications including a steel...
1965-72 Chevrolet, Oldsmobile; Trunk Lock Cylinder Gasket; Molded Rubber; Various Models
Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1963-64 Impala, Bel Air, Biscayne; Hood to Cowl Seal Weatherstrip Seal
Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...
1941-76 Mohair Window Channel Liner ; 2-5/8" wide x 8" long
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
1964 Impala, Bel Air, Biscayne; Rear Bumper to Body Seal
Excellent reproduction of the original body seal strip designed to seal and fill the area where the rear bumper meets the body. This reproduction will install and fit as original offering an authentic appearance. This seal is...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1955-76 Chevrolet Bel Air, 150, 210, Impala, Caprice; Fender Skirt Rubber Seal ; 120" Long; OER
Reproduction fender or quarter panel skirt rubber seal for various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance. Measures 120"...
1958-64 Impala, Bel Air; Quarter Window Vertical Weatherstrip; 2 Door; Hardtop, Convertible
Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...
1941-76 Mohair Window Channel Liner ; 1-5/8" Wide x 8" Long x 1/16" Thick
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...