1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1962-1967 Chevy II. Nova models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank; Zinc Coated; 17 Gallon Tank
Reproduction fuel tank for 1960-1966 Chevrolet & GMC 1/2 ton pickup truck models not equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in quality stamped steel featuring a zinc-coating....
Reproduction of the original fuel tank designed for use with 1960-1966 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for superior rust...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1963-72 Chevy, GMC Pickup Truck; Fuel Tank Relocate Kit; 20-Gallon Capacity; Side Fill Style
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 20 gallon side fill fuel tank, fuel tank...
1963-66 Chevrolet, GMC Truck; Fuel Tank Relocate Kit; 20 Gallon; Side Fill
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail. This conversion will help eliminate gas fumes in the cab while adding the benefit of more interior storage space. Each conversion set...
1960-66 Chevy, GMC Pickup; Fuel Tank Sending Unit; with Brass Float; with In-Cab Fuel Tank
Reproduction of the original fuel tank sending unit designed for use with 1960-66 Chevrolet and GMC pickup truck models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it...
1962-67 Chevy II, Nova; Fuel Tank; Zinc Coated; 16 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1962-67 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in zinc coated steel. This is a 16 gallon fuel tank that replaces the...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....
Reproduction fuel tank for 1964-67 Chevrolet Chevelle and Malibu sedan, hardtop and convertible models. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion...
Reproduction fuel tank for 1964-67 Chevrolet Chevelle and Malibu wagon models. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion prevention. This is a 20...
1963-67 Chevrolet Corvette; Fuel Tank; Zinc Coated; 20.5 Gallon Capacity
Reproduction fuel tank for all 1963-1967 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a...
1962-65 Chevy II, Nova; Fuel Tank Sending Unit; with 4 Bbl Carb; 3/8" Line
Reproduction of the original fuel tank sender unit designed specifically for 1962-65 Chevrolet Chevy II and Nova models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel...
1962-1964 Chevy II / Nova; Fuel Tank Filler Neck; Zinc Coated
A reproduction of the original style fuel tank filler neck designed for use with 1962-1964 Chevy II, Nova models. Each filler neck is manufactured in quality stamped steel featuring a zinc-plated coating for long-lasting rust...
1960-66 Chevrolet/GMC C/K Truck; Fuel Tank Filler Neck Grommet
OER reproduction gas tank filler neck grommet for 1960-66 Chevrolet and GMC pickup truck models. Each filler neck grommet is manufactured as original.
1962-64 Chevy II, Nova; Gas Cap; Chrome
Correct reproduction of the original fuel cap for use with 1962-64 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and bright...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit for 1961-64 Chevrolet Impala. Bel Air, and Biscayne models except station wagon. Each fuel sending unit is manufactured in quality steel to resist corrosion within your fuel tank. Provides...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Reproduction fuel tank sending unit produced with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Neck & Hose Set; with Black Neck, Hose, Clamps
Reproduction of the original style fuel tank filler neck, hose, and clamps for use with all 1960-66 Chevrolet and GMC pickup truck models as listed. The fuel tank filler neck is manufactured with heavy gauge steel for long...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original fuel tank filler neck designed for use with 1964 Impala, Bel Air, and Biscayne models (except station wagons). Each neck is manufactured to factory dimensions and replaces the original exactly....
1964-66 Chevrolet/GMC Truck, Suburban; Accelerator Pedal Pad
Reproduction accelerator pedal pad for 1964-66 Chevrolet and GMC trucks. Each accelerator pedal pad is manufactured in a plastic material to original specifications and features the correct original style waffle pattern at...
1962-67 Chevy II, Nova; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1962-67 Chevy II and Nova models (except station wagon). Each strap is manufactured in quality stainless steel for long lasting dependability. Replace the...
Reproduction of the original fuel tank mounting straps designed for use with 1961-1964 Impala, Bel Air, and Biscayne models (except station wagon). Each strap is manufactured in quality stamped steel and galvanized for long...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Grommet; Each
Reproduction of the original fuel tank filler grommet designed for use with 1964 Impala, Bel Air, Biscayne, 1964-67 El Camino, Chevelle, and Malibu station wagon models. Grommets are manufactured to correct dimensions...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1963-67 Chevrolet Corvette; Fuel Sending Unit; With Single 3/8" Outlet
Reproduction fuel level sending unit for 1963-67 Chevrolet Corvette models. Each sending unit is manufactured to correct factory specifications and replaces the old, or non working original exactly. This is a single 3/8"...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1960-1966 Chevrolet , GMC pickup truck models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic fitment and...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction of the original fuel tank mounting straps for use with 1963-1967 Chevrolet Corvette models. Each strap is manufactured in stainless steel offering the correct dimensions and length with a custom appearance....
Reproduction fuel tank sending unit for 1964 Chevrolet Chevelle, El Camino, Pontiac GTO, LeMans, Tempest, Buick Skylark, and Oldsmobile Cutlass and 442 models. Manufactured to factory specifications, this sending unit...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original fuel tank mounting straps designed for use with 1960-1966 Chevrolet, GMC pickup truck models. Each strap is manufactured in quality stamped steel, galvanized and EDP coated for long-lasting...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1963-67 Chevrolet Corvette; Fuel Tank Mounting Straps; Galvanized Steel; EDP Coated; Pair
Reproduction fuel tank mounting straps for 1963-1967 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Features a black EDP coating for superior rust and corrosion...
1963-67 Chevrolet Corvette; Fuel Filler Neck; Gas Filler Neck; Coupe Models
Reproduction of the original style fuel tank filler neck designed for use with 1963-1967 Chevrolet Corvette coupe models. Features correct mounting holes that match the original GM neck. Manufactured in steel tubing with a...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
Reproduction fuel tank mounting straps for 1967-72 Chevrolet and GMC Pickup truck, Blazer, Jimmy, and Suburban models. Each strap is manufactured in quality stamped steel. Comes with a black EDP Coating for rust and corrosion...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Correct reproduction of the original fuel tank designed for with 1961-64 Chevrolet Impala, Bel Air, Biscayne models (except station wagon). This reproduction fuel tank is manufactured in stainless steel replicating the...
1963-66 Chevrolet/GMC Truck; Fuel Tank Relocate Kit; With Top Fill; 17-Gallon Capacity
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail. To eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 17 gallon top fill fuel tank, fuel tank...
1962-67 Chevy II, Nova; Nitern Coated Fuel Tank; 16 Gallon
Correct reproduction of the original fuel tank designed for with 1962-67 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in Nitern coated steel. This is a 16 gallon fuel tank that replaces the...
1963-72 Chevy, GMC Pickup Truck; Fuel Tank Relocate Kit; 17-Gallon Capacity; Top Fill Style
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 17 gallon top fill fuel tank, fuel tank...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1961-64 Impala, Bel Air, Biscayne; NiTerne Coated Fuel Tank; with Flange; 20 Gallon
Reproduction of the original fuel tank designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a...
Reproduction of the original fuel tank designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
1955-70 Impala, Full Size; Fuel Tank Mounting Strap Hardware Set; 6-Pieces
Use proper mounting hardware to make your fuel tank installation job easier. This hardware set is the correct replacement fuel tank strap bolt set for 1955-70 full size Chevrolet models including 150, 210, Bel Air, Impala,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
1962-65 Chevy II, Nova; Fuel Tank Sending Unit; with 2 bbl Carburetor; 5/16"
Reproduction of the original fuel tank sending unit designed for use with 1962-65 Chevrolet Chevy II and Nova sedan, hardrop, and station wagon models with 2 bbl carburetor with 5/16" line. Each sender is produced in quality...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Neck & Hose Set; with Chrome Neck, Hose, Clamps
Reproduction of the original style fuel tank filler neck, hose, and clamps for use with all 1960-66 Chevrolet and GMC pickup truck models as listed. The fuel tank filler neck is manufactured with heavy gauge steel for long...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1963-74 Chevrolet Corvette; Fuel Tank Filler Neck; 1963-1967 Convertible; 1968-74 All
Reproduction of the original style fuel tank filler neck designed for use with 1963-1967 Corvette Convertible, and all 1968-1974 Chevrolet Corvette models. Features correct mounting holes that match the original GM neck....
Reproduction of the original gas tank straps designed for use with 1961-64 Chevrolet Bel Air, Impala, and Biscayne (except station wagon) models. Each strap is manufactured in quality stainless steel with all correct contours...