Reproduction outer grill assembly for 1964-66 Chevrolet pickup trucks. Manufactured to factory specifications, each reproduction grill features the wording "CHEVROLET" in block lettering across the top bar of the grill....
1964 Impala SS; Trunk and Rear Cove Panel Molding Kit; without Trunk Spear
Reproduction of the original rear deck panel molding kit designed for use 1964 Impala SS models. Each molding is manufactured to correct OE specifications replicating the original in every detail. Note: Chevrolet emblem sold...
1964 Chevy II Nova; Front Grill Assembly; with Pre-Assembled Mounting Brackets
OER reproduction of the front grill assembly designed for use with 1964 Chevy II and Nova models. This grill is the finest reproduction on the market, manufactured from all new tooling. Each grill features crisp lines and a...
1964 Chevrolet Impala, Bel Air, Biscayne; Front Grill; GM Licensed; OER
Reproduction of the original front grill designed for use on 1964 Impala, Bel Air and Biscayne models. This reproduction front grill is manufactured in quality stamped aluminum offering an original appearance and fit. Grills...
1962-66 Chevy Fleetside Pickup; Long Bed; Side Molding Set; 16 Piece; with Clips and Hardware
Beginning in 1962, GM began to encourage buyers to purchase extra-cost items in convenient custom packages. One of these upgrades, the Custom Side Molding option, consisted of a trim spear that swept the full length of the...
1962-66 Chevrolet Fleetside Pickup; Short Bed; Side Molding Set; 16 Piece; with Clips and Hardware
Beginning in 1962, GM began to encourage buyers to purchase extra-cost items in convenient custom packages. One of these options were custom aluminum side moldings consisting of trim spear moldings that swept the full length...
1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set
OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...
1964 Chevrolet Impala; Trunk And Rear Cove Panel Molding Kit; with Trunk Spear
Reproduction of the original style rear deck panel moldings desogned for use with 1964 Chevrolet Impala standard models except station wagons. Each molding is manufactured to correct factory specifications for an authentic...
1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair
Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...
1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop
OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...
1962-64 Impala, 1962 Bel Air; Rear Back Glass Molding Set; 2 Door, Hardtop; 5 Piece Set; OER
OER® reproduction of the original back glass molding set designed for use on 1962 Bel Air 2 door hardtop, 1962-64 Impala, and Impala SS, 2-door hardtop models. Each set of back glass moldings is designed to replace the...
1962-67 Chevy II Nova; Front Windshield Molding Set; 2 Door Sedan; 4 Piece Set
Reproduction of the original front windshield moldings designed for use on 1962-67 Chevy II and Nova 2-door sedan models. Each molding is designed to exact factory specifications and duplicates the original in quality, fit...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
Reproduction rear window reveal molding set for 1964-65 Chevrolet Chevelle, Malibu, Buick Special, and Skylark 2-door hardtop models. Manufactured to factory specifications, this 5-piece set of polished stainless steel...
1962 Bel Air, 1962-64 Impala; Roof Drip Rail Moldings; 2 Door Hardtop; RH & LH; Pair
Reproduction roof drip moldings for 1962-64 Chevrolet Bel Air, and 1962-64 Impala 2 door hardtop models. Each molding is manufactured in stamped aluminum to OE specifications and will replace the old, damaged, or missing...
Reproduction front windshield reveal molding set for 1964-65 GM A-Body models and 1964-67 Chevrolet El Camino. Each molding is an exact replica of the original. Manufactured to factory specifications, each molding will fit...
1962-65 Chevy II Nova; Upper Trunk Cove Molding
Quality reproduction 1962-65 Chevy II and Nova upper trunk cove molding. Moldings are manufactured in stamped aluminum replicating the original in appearance and fit. Replace your dented or missing cove moldings and restore...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1964 Chevy II, Nova; Grill Bracket Set; 5 Piece
Authentic reproduction grill bracketry for 1964 Chevy II and Nova models. Each grill bracket replicates the original in quality and design. Set includes 5 OEM style brackets to replace the originals for any 1964 Chevy II /...
1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
1962-66 Chevrolet Short Bed Pickup; Side Molding Clip Set; Upper & Lower; 86 Piece Set
Exact reproduction of the original factory molding clip set as found on 1962-66 Chevrolet short bed trucks. Each set is manufactured in steel, and comes with seal that seals the molding hole to prevent water and other...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1964 Chevy II, Nova; Center Grill Brackets; with Rubber Anti-Rattle Strips; Pair
OER reproduction of the original 2 middle grill mount brackets for 1964 Chevy II and Nova grills. These are the 2 brackets that install on either side of the center / hood latch support bracket. Manufactured from stamped...
1964 Impala; Bel Air; Trunk Split Molding Clip Set
The correct hardware can make a great difference in the finished look or your restoration. When mounting or replacing the trunk center split molding on your 1964 Impala or Bel Air model, use the correct clips for a proper...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1964 Impala; Quarter Panel Molding Clip Set; LH and RH Sides; 56-Pieces
The correct hardware can make a great difference in the finished look or your restoration. When mounting the quarter panel moldings on your 1964 Impala 2 door (all except 2 door SS), use the correct clips for a proper fit....
1964 Impala; Fender Molding Clips Set; 18 Clips, 18 Nuts; except SS Models
The correct hardware can make a great difference in the finished look or your restoration. When mounting the front fender moldings on your 1964 Impala (except SS models), use the correct clips for a proper fit. This set...
1962-66 Chevrolet / GMC Truck; Upper Bed Molding Clips; Long Bed; OE-Style; 26-Pieces
Exact reproduction of the original factory upper molding clip set as found on 1962-66 Chevrolet and GMC long bed trucks. Each metal clip is manufactured in steel, and comes with seal that seals the molding hole to prevent...
1962-66 Chevrolet Short Bed Pickup Truck; Lower Bed Molding Clips; OE-Style; 22 Piece Set
Exact reproduction of the original factory lower molding clip set as found on 1962-66 Chevrolet short bed trucks. Each metal clip is manufactured in steel, and comes with seal that seals the molding hole to prevent water and...
1962-66 Chevrole, GMC Pickup; Upper Door & Cab Molding Clip Set; OE Style; 16 Piece Set
Exact reproduction of the original factory molding clip set as found on 1962-66 Chevrolet and GMC trucks. Each metal clip is manufactured in steel, and comes with seal that seals the molding hole to prevent water and other...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1964 All Makes All Models Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
Exact reproduction of the original factory molding clip as found on 1962-66 Chevrolet and GMC trucks. Each metal clip is manufactured in steel, and comes with seal that seals the molding hole to prevent water and other...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1962-1976 GM; Rocker Panel Molding Retainer; Each
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1964 Impala SS Trunk And Rear Cove Panel Molding Kit With Trunk Spear
Reproduction of the rear deck panel molding set designed foruse on 1964 Impala SS models. Each molding is manufactured to exact factory specifications and will replace the original exactly. Replace the old or worn out rear...
1964 Impala, Bel Air, Biscayne; Front Grill Assembly; with Brackets; Pre-Assembled
Manufactured by OER to original factory specifications. Each grill is manufactured with quaility stamped aluminum and anodized to OE specifications ensuring a quality fit and appearance. This unique grill allows the installer...
1964 Chevrolet Bel Air, Biscayne, Impala; Front Hood Lip Molding; with Emblem & Hardware
Reproduction front hood lip molding & emblem for 1964 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum duplicating the original GM molding in every detail for an...
1964-66 Chevrolet Truck; Front Grill Assembly; Chrome; w/o Lettering
OER® Authorized reproduction of the original front grill assembly for designed for use with 1964-66 Chevrolet pickup, Suburban, and Panel truck models. Each grill is manufactured to correct factory specifications...
1963-64 Impala; Windshield Molding Set; 2-Door Hardtop; 5-Piece Set
Reproduction windshield reveal moldings for 1963-64 Chevrolet Impala 2-door hardtop models. Each set of windshield moldings is designed to replace the old or damaged originals exactly. Each molding is manufactured in quality,...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1964 Impala, Bel Air, Biscayne; Center Rear Cove Molding; Standard Models
Reproduction of the original rear cove center panel molding designed for use on 1964 Impala and Full Size Chevrolet models with factory standard trim level. Each molding is stamped from quality aluminum material in the...
1962-67 Chevy II Nova; Front Windshield Molding Set; 2 Door; Hardtop, Convertible; 4 Piece Set
Reproduction of the original front windshield moldings designed for use with 1962-67 Chevy II Nova 2-door hardtop and convertible models. Designed to exact factory specifications, each duplicates the original exactly for an...
1964 Impala Standard Model Rear Cove Panel Molding Kit
Reproduction rear cove panel moldings with lettering as original. Kit includes: Center molding with letters RH quarter extension molding LH quarter extension molding Mounting clips These are exact reproduction moldings...
1964 Impala, Bel Air, Biscayne; Lower Grill Molding
Reproduction of the original lower grill molding designed for use on 1964 Impala, Bel Air and Biscayne models. This 71" long molding is stamped to exact specifications and features correct finish and contours for a perfect...
1964 Impala, Bel Air; Trunk Center Molding; Trunk Spear; with Hardware
Reproduction of the original Chevrolet Impala or Bel Air center trunk split molding designed for use on 1964 models. This center trunk molding runs down the center of the trunk lid and sections off the RH from the LH sides....
1964 Impala, Bel Air, Biscayne;Center Hood Split Molding; Spear
Reproduction of the original Impala, Bel Air and Biscayne center hood split molding for 1964 models. This hood split molding runs down the center of the hood and sections off the RH from the LH sides of the hood. Each molding...
1962-64 Chevy II / Nova; Front Hood Split Molding
Reproduction of the original hood split molding designed for use on all 1962-64 Chevy II and Nova models. Installs onto the centerline of the hood. Each molding is a precision chrome zinc die-cast reproduction of the original...
1964 Chevelle, El Camino, Malibu; Front Grill; Aluminum
Reproduction front grill unit for 1964 Chevrolet Chevelle, El Camino, and Malibu models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the original in quality,...
1962-65 Chevy II / Nova; Outer Trunk Cove Molding; Pair
Quality reproduction of the outer trunk cove moldings for all 1962-65 Chevy II/Nova models except wagon. Reproduced to exact OE specifications for a perfect fit and original appearance. Fits hardtop, sedan and convertible...
1962-65 Chevy II Nova; Roof Drip Molding Set; 2 Door, Hardtop, Coupe; 4 Piece Set
Reproduction of the original roof drip moldings designed for use on 1962-65 Chevy II and Nova 2 door hardtop models. This 4-piece set will replace your original drip rail moldings exactly. Designed to original factory...
1964-65 Chevelle, Malibu 2-Door Coupe; Roof Drip Rail Molding Set; 6-Pieces
Reproduction roof drip moldings for 1964-65 Chevelle and Malibu 2-door coupe models. Each molding set is manufactured in stamped aluminum to OE specifications and will replace the old, damaged, or missing originals. Sold in...
1964 Impala SS, Bel Air, Biscayne; Upper Trunk Lid Molding; Except Station Wagon
Reproduction of the original upper trunk molding designed for use with 1964 Impala SS, Bel Air, and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...
Reproduction of the original outer tail cove moldings designed for use with 1964 Impala SS, Bel Air and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...