Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...
1958-64 Impala, Bel Air, Biscayne; Front Sway Bar" 1" Diameter
Front sway bar kit for 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. This sway bar kir is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and...
1954-05 Front Sway Bar End Link; 3-3/8" Spacer; LH or RH Side; 2 Required
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. {fitment}
1958-64 Impala / Full Size Upper Control Arm; RH
This is a reproduction of the right hand upper control arm used on 1958-64 full size models. For left hand side use Part # A1000. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold...
Reproduction bushing for the rear panhard rod on 1959-64 Chevrolet Impala, Bel Air, Biscayne models, and for the rear strut rod on 1959-62 Corvette. If your full size Chevrolet or Corvette model is feeling loose around...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set
Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts. {fitment}
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shaft; LH or RH
Quality reproduction of the lower control arm cross-shaft for use on various 1958-64 Chevrolet Impala, Bel Air, Biscayne, and 1963-82 Corvette models. Each control arm shaft is manufactured in quality stamped steel to...
1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers
Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1955-70 Full Size Chevy; Upper Ball Joint; with Hardware; RH or LH
Reproduction of the original upper ball joint designed for use with 1955-70 Chevy full size models including 1955-57 Chevy, and 1958-70 Impala, Bel Air, Biscayne, and Caprice models. Control arm ball joints take a beating...
1958-82 Chevrolet; Lower Ball Joint with Hardware; Various Applications
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1958-64 Impala / Full Size Upper Control Arm; LH
This is a reproduction of the upper left hand control arm used on 1958-64 full size models. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold separately. For rig ht hand side use Part #...
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Set
Reproduction of the original style lower control arm shafts for use with 1958-64 Impala, Bel Air, Biscayne and full size Chevrolet models. Set include shafts, bushings, washers and washer/bushing retainer bolts. Sold in...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH and RH
Quality reproduction of the lower control arm cross-shafts for use on various 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Upper control arm shafts are manufactured in quality stamped steel to original factory...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...