Product#: K630

1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long

Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...


Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...


Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: FT2000C

1962-67 Chevy II, Nova; Fuel Tank; Stainless Steel; 2 & 4 Door Coupe, Sedan, Convertible; 16 Gallon Capacity; Except 1962-63, 9 Passenger Station Wagon Models

Correct reproduction of the original fuel tank designed for with 1962-1967 Chevy II. Nova models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an...


Product#: FT5004A

1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank; Zinc Coated; 17 Gallon Tank

Reproduction fuel tank for 1960-1966 Chevrolet & GMC 1/2 ton pickup truck models not equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in quality stamped steel featuring a zinc-coating....


Product#: FT5004B

1960-1966 Chevrolet, GMC, Pickup Truck; Niterne Coated Fuel Tank; with Fuel Filler Neck; 17 Gallon Capacity

Reproduction of the original fuel tank designed for use with 1960-1966 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for superior rust...


Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...


Product#: 6428058

1960-66 Chevy, GMC Pickup; Fuel Tank Sending Unit; with Brass Float; with In-Cab Fuel Tank

Reproduction of the original fuel tank sending unit designed for use with 1960-66 Chevrolet and GMC pickup truck models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it...


Product#: YC111232A

1961-62 Chevrolet Corvette; Fuel Tank; Zinc Coated; With Vent, With Baffles; VIN #"s 3201 and Higher; 16 Gallon Capacity

Reproduction fuel tank for Mid 1961-62 Chevrolet Corvette models with VIN #'s 3201 and higher. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for...


Product#: FT2000A

1962-67 Chevy II, Nova; Fuel Tank; Zinc Coated; 16 Gallon Tank

Correct reproduction of the original fuel tank designed for with 1962-67 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in zinc coated steel. This is a 16 gallon fuel tank that replaces the...


Product#: B14177

1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each

Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....


Product#: 6426299

1962-65 Chevy II, Nova; Fuel Tank Sending Unit; with 4 Bbl Carb; 3/8" Line

Reproduction of the original fuel tank sender unit designed specifically for 1962-65 Chevrolet Chevy II and Nova models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel...


Product#: CX1360

1960-66 Chevrolet/GMC C/K Truck; Fuel Tank Filler Neck Grommet

OER reproduction gas tank filler neck grommet for 1960-66 Chevrolet and GMC pickup truck models. Each filler neck grommet is manufactured as original. {fitment}


Product#: N244

1962-64 Chevy II, Nova; Gas Cap; Chrome

Correct reproduction of the original fuel cap for use with 1962-64 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and bright...


Product#: H22662

1962-1964 Chevy II / Nova; Fuel Tank Filler Neck; Zinc Coated

A reproduction of the original style fuel tank filler neck designed for use with 1962-1964 Chevy II, Nova models. Each filler neck is manufactured in quality stamped steel featuring a zinc-plated coating for long-lasting rust...


Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: K94763

1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Neck & Hose Set; with Black Neck, Hose, Clamps

Reproduction of the original style fuel tank filler neck, hose, and clamps for use with all 1960-66 Chevrolet and GMC pickup truck models as listed. The fuel tank filler neck is manufactured with heavy gauge steel for long...


Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...


Product#: YC111244

1961-62 Chevrolet Corvette; Fuel Sending Unit; with Single 3/8" Outlet; Slip-on Style Fitting

Reproduction fuel level sending unit for 1961-62 Chevrolet Corvette models. Each sending unit is manufactured to correct factory specifications and replaces the old, or non working original exactly. This is a single 3/8"...


Product#: 153665A

1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...