Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1961-64 GM B-Body Convertible; Top Only; Use With Plastic Curtain; Canvas Cloth; Black
Reproduction convertible top, manufactured using heavy weight Stayfast Canvas Cloth materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams are highly...
1961 Impala, Bel Air, Biscayne; Front Bumper Set; 3 Piece; Chrome
Reproduction of the original 3 piece front bumper designed for 1961 Chevrolet Impala, Biscayne, and Bel Air models. This reproduction bumper set is manufactured to factory specifications and features a beautifully polished...
1961-62 Impala / Fullsize 4 Door Hardtop Smoke Back Glass
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
1961-64 GM B-Body Convertible; Rear Window Only; Glass; Canvas Cloth; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight Stayfast canvas cloth materials to ensure longevity and durability. Original manufacturing techniques assure that...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1961-64 GM B-Body Convertible; Rear Window Only; Glass; Vinyl; White
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you...
1961-64 Impala, LeSabre, Electra, Catalina; Convertible Top Header Bow
Reproduction of the original convertible top header bow designed for use with various 1961-64 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac B-body full size models as listed. Each header bow is manufactured to factory...
1961-64 GM B-Body Convertible; Rear Window Only; Glass; Vinyl; Buckskin
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you...
1961-64 GM B-Body Convertible; Top Only; Use With Plastic Curtain; Vinyl; White
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
Reproduction of the original convertible top unit designed to replace worn or damaged tops on 1961-64 Buick, Chevrolet, Pontiac, and Oldsmobile B-body full-size models. Each top is precision manufactured using heavy weight...
1961-64 GM B-Body Convertible; Top Only; Use With Glass Window; Vinyl; Buckskin
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
1961-64 GM B-Body Convertible; Top Only; Use With Plastic Curtain; Vinyl; Buckskin
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
Reproduction of the original front windshield glass for use with 1961-62 Buick, Chevrolet, Pontiac, and Oldsmobile Full Size 2 & 4 door hardtop, and convertible models as listed. This windshield is manufactured with tempered...
Reproduction of the original front windshield glass for use with 1961-62 Buick, Chevrolet, Pontiac, and Oldsmobile Full Size 2 & 4 door, sedan, hardtop, and station wagon models as listed. This windshield is manufactured with...
1961-62, 1965-68 Impala, Bel Air, Biscayne, Caprice; Front Outer Door Handle Set; 2 or 4 Door
Quality reproduction outer door handle set for 1961-62 and 1965-68 Impala and Full Size models. Each door handle set is manufactured in zinc die-cast zinc and includes a high quality triple chrome plating offering a factory...
1961-62 Impala, Bel Air; Rear Window Glass; Clear; 2-Door, Bubble Top; OER
Reproduction back window glass for various 1961-62 Buick, Chevy, Oldsmobile, and Pontiac 2 door bubble top models. Each rear window glass is manufactured to factory specifications featuring correct glass shape and contours...
1961-64 GM B-Body Convertible; Rear Window Only; Plastic; Canvas Cloth; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight Stayfast canvas cloth materials to ensure longevity and durability. Original manufacturing techniques assure that...
1961-64 GM B-Body Convertible; Rear Window Only; Plastic; Vinyl; Tan
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1961-64 GM B-Body Convertible; Rear Window Only; Plastic; Vinyl; Buckskin
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1961-64 Impala Convertible Door Glass Assembly With Clear Glass; LH
This reproduction door glass assembly comes with frame and new glass completely assembled and ready to install. Note: Shipped oversize.
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1961-64 Impala Convertible Door Glass Assembly With Tinted Glass; LH
This reproduction door glass assembly comes with frame and new glass completely assembled and ready to install. Note: Shipped oversize.
1961-64 Impala Convertible Door Glass Assembly With Tinted Glass; RH
This reproduction door glass assembly comes with frame and new glass completely assembled and ready to install. Note: Shipped oversize.
1947-79 Chevy, GMC Car & Truck; Chrome Drop Mount Peep Mirror; 4"; LH or RH; Each; Various Models;
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4" mirror head. Fits sedan and truck closed...
1961-64 Impala, Bel Air, Biscayne; Hardtop, Sedan; Trunk Lid Hinges; LH & RH; Pair; EDP Finish
Reproduction trunk lid hinges for 1961-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These hinges are manufactured in quality stamped steel to factory specifications and feature correct torque rod...
1955-64 Chevrolet, GM; Window Regulator Roller And Rivet; for 5/16" Hole
Reproduction of the original window regulator roller unit for various 1955-64 Chevrolet models with 5/16" rivet. Three required per door. Also used on rear quarter window on 1961-64 Impala, Bel Air, and Biscayne models. Sold...
1961 Impala, Eldorado, Electra, LeSabre, Bonneville, Catalina; Convertible Top Cylinder; Each
Replacement convertible top cylinder for 1961 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum casting for superior strength compared to...
Reproduction of the original lower window channel for use with various 1961-64 Buick, Chevrolet, Pontiac, and Oldsmobile models. The door window glass rests in the channel assembly as it mounts to the regulator. Manufactured...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction of the original upper door hinge designed for use on 1961-64 Impala, Bel Air, Biscayne, and other GM B-Body models. Worn or sagging door hinges can cause misalignment and potential damage to the door, lock...
1961-65 GM Full Size; Vent Window Regulator; Passenger Side; GM B Body Models
Reproduction of the original vent window requlator designed for use on various 1961-65 GM Buick, Chevrolet, Oldsmobile, and Pontiac full size models. Each regulator is designed and manufactured to replicate the original in...
1961-64 GM Full Size, Impala Convertible; Door Window Frame; Chrome; LH or RH
Replace a broken or missing door window frame with this quality reproduction that is designed to replace your originals exactly. The door window frame helps support the glass when installed in the door. Sold individually....
1961 Chevrolet Impala; Hardtop/Coupe; Trunk Mat Carpet w/ Pad; Loop; Medium Blue
The same superior carpet offered for the passenger area of your classic is also available for the trunk area. This superior 80%-20% Rayon/Nylon blend loop carpet fits the whole trunk area. Made in USA This top quality carpet...
Reproduction of the original vent window assembly for use with 1961-62 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile full size models as listed below. Each vent assembly is manufactured to correct factory specifications...
Reproduction of the original vent window assembly for use with 1961-62 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile full size models as listed below. Each vent assembly is manufactured to correct factory specifications...
Reproduction of the original vent window assembly for use with 1961 Impala, 1961-62 Bel Air "Bubble Top" models. Each vent assembly is manufactured to correct factory specifications and ready to install. Includes the complete...
Reproduction of the original vent window assembly for use with 1961 Impala, 1961-62 Bel Air "Bubble Top" models. Each vent assembly is manufactured to correct factory specifications and ready to install. Includes the complete...
Replace a broken or missing door window frame with this quality reproduction that is designed to replace your originals exactly. The door window frame helps support the glass when installed in the door. Glass not included....
1961-62 Buick, Chevrolet, Pontiac, Oldsmobile Full Size; Front Door Latch; LH Driver Side
OER® Authorized reproduction of the original door latch assembly designed for use with 1961-62 GM B-Body 2-door hardtop and convertible models. Each latch is precision manufactured to exact factory specifications,...
1961-62 Buick, Chevrolet, Pontiac, Oldsmobile Full Size; Front Door Latch; RH Passenger
OER® Authorized reproduction of the original door latch assembly designed for use with 1961-62 GM B-Body 2-door hardtop and convertible models. Each latch is precision manufactured to exact factory specifications,...
Reproduction rear trunk lid hinges for 1961-64 Chevrolet, 1963-64 Oldsmobile, and 1963-65 Buick full size hardtop and sedan models (will not fit convertible models). The trunk lid hinges are manufactured to factory dimensions...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1961-64 Chevrolet, GM Full Size 4-Door Wagon; Quarter Window Glass; Clear
Replacing your broken or missing quarter glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you see clearly. Designed to fit and install exactly as original. Fits LH or RH....
1959-76 GM; Convertible Top Boot Silde Rail Retainer; with 8 Mounitng Holes
Reproduction of the original style convertible top boot retainer for 1959-76 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models (except Camaro, Firebird). The top boot will slide into this retainer in order to hold...
1961 Impala Convertible Gray/Black Crowsfoot 3 Piece Vinyl Trunk Floor Mats
Restore your trunk area with the finest quality reproduction trunk mat currently available! This is a reproduction of the original crowsfoot pattern vinyl trunk mat that covers the trunk floor. The mat is made from OE style...
Reproduction of the original hose retainer clip designed for use with 1967-69 GM convertible models. Each clip is manufactured in stamped steel and heat treated for extra strength. This clip is designed to retain the...
1961 Impala / Full Size Hardtop Gray/Black Crowsfoot 3 Piece Vinyl Trunk Floor Mats
Restore your trunk area with the finest quality reproduction trunk mat currently available! This is a reproduction of the original crowsfoot pattern vinyl trunk mat that covers the trunk floor. The mat is made from OE style...
/li> 1961-62 Pontiac Applications: Catalina; Jobs 2337, 2347, Bonneville; Jobs 2537, 2847, Grand Prix; Jobs 2837, 2947 2 Door Hardtop Catalina, Bonneville, Star Chief; Jobs 2339, 2639, 2839, 2539 4 Door Hardtop Catalina; Jobs...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...