1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank; Zinc Coated; 17 Gallon Tank
Reproduction fuel tank for 1960-1966 Chevrolet & GMC 1/2 ton pickup truck models not equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in quality stamped steel featuring a zinc-coating....
Reproduction of the original fuel tank designed for use with 1960-1966 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for superior rust...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1960-66 Chevy, GMC Pickup; Fuel Tank Sending Unit; with Brass Float; with In-Cab Fuel Tank
Reproduction of the original fuel tank sending unit designed for use with 1960-66 Chevrolet and GMC pickup truck models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it...
Reproduction fuel tank for Mid 1961-62 Chevrolet Corvette models with VIN #'s 3201 and higher. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....
1960-66 Chevrolet/GMC C/K Truck; Fuel Tank Filler Neck Grommet
OER reproduction gas tank filler neck grommet for 1960-66 Chevrolet and GMC pickup truck models. Each filler neck grommet is manufactured as original.
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit for 1961-64 Chevrolet Impala. Bel Air, and Biscayne models except station wagon. Each fuel sending unit is manufactured in quality steel to resist corrosion within your fuel tank. Provides...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Reproduction fuel tank sending unit produced with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Neck & Hose Set; with Black Neck, Hose, Clamps
Reproduction of the original style fuel tank filler neck, hose, and clamps for use with all 1960-66 Chevrolet and GMC pickup truck models as listed. The fuel tank filler neck is manufactured with heavy gauge steel for long...
Reproduction of the original fuel tank mounting straps designed for use with 1961-1964 Impala, Bel Air, and Biscayne models (except station wagon). Each strap is manufactured in quality stamped steel and galvanized for long...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1961-62 Chevrolet Corvette; Fuel Sending Unit; with Single 3/8" Outlet; Slip-on Style Fitting
Reproduction fuel level sending unit for 1961-62 Chevrolet Corvette models. Each sending unit is manufactured to correct factory specifications and replaces the old, or non working original exactly. This is a single 3/8"...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1960-1966 Chevrolet , GMC pickup truck models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic fitment and...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1956-62 Chevrolet Corvette; Fuel Tank Mounting Straps; Stainless Steel
Reproduction fuel tank mounting straps for 1956-62 Chevrolet Corvette. Each strap is manufactured in stainless steel offering a custom appearance. Stainless steel offers superior rust and corrosion resistance. Sold in a pair.
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original fuel tank mounting straps designed for use with 1960-1966 Chevrolet, GMC pickup truck models. Each strap is manufactured in quality stamped steel, galvanized and EDP coated for long-lasting...
1956-62 GM; Fuel Tank Filler Hose; 2" ID x 4-7/16" Length
Reproduction fuel tank filler hose for 1957 models. Hose is specifically engineered to stand up to gasoline, fuel oil, and other petroleum-based products. Clamps sold seperately. Measures 4-7/16" in length, inside diameter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1960-63 Chevrolet/GMC Truck; Choke Cable; With Knob
Reproduction of the original choke cable designed for use with 1960-63 Chevrolet and GMC truck models as listed. Each cable is manufactured to factory specifications replicating the original in length and appearance offering...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1960-63 Chevrolet/GMC Truck; Throttle Cable; With Knob
Replace your original choke cable with this authentic reproduction throttle cable designed for use with 1960-63 Chevrolet and GMC truck models. The throttle cable mounts to the dash and offers reliable operation to the...
1953-62 Chevrolet Corvette; Fuel Tank Straps; Stamped Steel; EDP Coated; Pair
Reproduction fuel tank mounting straps for 1956-1962 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Features a black EDP coating for rust and corrosion...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Correct reproduction of the original fuel tank designed for with 1961-64 Chevrolet Impala, Bel Air, Biscayne models (except station wagon). This reproduction fuel tank is manufactured in stainless steel replicating the...
1961-64 Impala, Bel Air, Biscayne; NiTerne Coated Fuel Tank; with Flange; 20 Gallon
Reproduction of the original fuel tank designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a...
Reproduction of the original fuel tank designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
Reproduction stamped steel fuel tank for 1957 to Early 1961 Corvette with VIN #'s 1421 through 3200. Manufactured to factory specifications and finished in a zinc coating for corrosion resistance. Comes with lock ring gasket...
1955-70 Impala, Full Size; Fuel Tank Mounting Strap Hardware Set; 6-Pieces
Use proper mounting hardware to make your fuel tank installation job easier. This hardware set is the correct replacement fuel tank strap bolt set for 1955-70 full size Chevrolet models including 150, 210, Bel Air, Impala,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
1960-66 Chevrolet, GMC Pickup Truck; Fuel Tank Neck & Hose Set; with Chrome Neck, Hose, Clamps
Reproduction of the original style fuel tank filler neck, hose, and clamps for use with all 1960-66 Chevrolet and GMC pickup truck models as listed. The fuel tank filler neck is manufactured with heavy gauge steel for long...
1961-1963 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original style steel fuel tank filler neck designed for use with 1961-1963 Impala, Bel Air, and Biscayne models. Each filler neck assembly is manufactured in quality stamped steel and features a gray...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Reproduction of the original gas tank straps designed for use with 1961-64 Chevrolet Bel Air, Impala, and Biscayne (except station wagon) models. Each strap is manufactured in quality stainless steel with all correct contours...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1961-64 Impala, Bel Air, Biscayne 6 Pass Station Wagon; Fuel Tank Sending Unit; with 5/16" Line
Reproduction of the original fuel tank sending unit designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne station wagon models with 5/16" line. Each sender is produced in quality steel to resist corrosion...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Universal fuel tank sending unit for various 1931-53 Chevrolet and GMC trucks with custom tank under the bed and other GM models up to 1964 that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm...
1961-1962 Chevrolet Corvette; Fuel Tank Filler Neck; Zinc Coated
Reproduction of the original fuel tank filler neck designed for use with 1961-1962 Chevrolet Corvette models. Each fille neck is manufactured in steel tubing for original fit and OE appearance. Features a deep zinc plating...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1955-86 Chevy, GMC, Pontiac; Fuel Pump Push Rod; Small Block / Big Block
Reproduction fuel pump push rod for 1955-86 Chevrolet, GMC, and Pontiac models. Fits Chevrolet small block, big block, and Pontiac V8 engines. 5-3./4" long x 1/2" dia.
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair
Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...
1947-66 Chevrolet/GMC Truck; 1955-57 Bel Air, 150, 210; Fuel Tank Sending Unit Screw Set
Reproduction of the original fuel tank sending unit screws and washers designed for use with 1947-66 Chevrolet, GMC trucks, and 1955-57 Bel Air, 150, 210, and Nomad models as listed. Each set features 5 phillips head screws...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models
Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...
Reproduction of the original fuel tank sending unit designed for use with 1955-57 Chevy Bel Air, 150, 210, Nomad, and 1931-62 Chevy and GMC pickup truck models. Correct replacement of the original fuel tank sending unit...