1955-59 Chevrolet, GMC Pickup Truck; Front Windshield Glass; Clear
Reproduction of the original front non-tinted windshield glass designed for use with 1955-59 Chevrolet and GMC pickup truck models. Each glass is manufactured to correct dimensions using quality tempered laminated safety...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-72 Chevrolet/GMC Truck Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3 piece stainless steel screw set for mounting the outer door side mirror arms on 1947-72 Chevrolet and GMC trucks. One set per mirror arm required. Note: Not for use on 1970-72 door mirror assemblies....
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1959-60 El Camino; Back Glass; Light Green Tint
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
1955-59 Chevrolet, GMC Pickup Truck; Front Windshield Glass; Gray Tinted With Dark Gray Shade
Reproduction windshield glass for 1955-59 Chevrolet and GMC pickup truck models. Each glass is manufactured to correct factory dimensions replicating the exact design of the original. Windshield is manufactured in laminated...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1952-59 Chevrolet, GMC Pickup Truck; Outer Door Handle Set; with Push Button & Hardware
Reproduction of the original outer door handle and push button set designed for use with 1952-1959 Chevrolet and GMC pickup truck models. Each handle is precision-manufactured in high-quality die-cast zinc and finished with a...
1955-59 Chevrolet, GMC Pickup Truck; Front Windshield Glass; Tinted; without Upper Shade
OER® Authorized Reproduction of the original windshield glass designed for use with 1955-59 Chevrolet and GMC pickup truck models. Each glass is manufactured to correct factory dimensions replicating the exact design of...
1947-79 GM; Various Models; Chrome Drop Mount Peep Mirror; LH Or RH; 4"
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4 inch mirror head. Fits sedan and truck...
1955-1959 Chevrolet, GMC Truck; Clear Door Glass Assembly; Chrome Frame, Setting Channel; RH
Reproduction of the original door glass assembly for use with 1955-59 Chevrolet and GMC truck models. Glass installation is made simple with this door glass and window frame assembly. Includes clear door glass, the chrome...
1955-1959 Chevrolet, GMC Truck; Tinted Door Glass and Chrome Frame; w/Channel Setting; RH
Reproduction of the original front door glass assembly designed to replace the glass on 1955-59 GM truck models. Glass installation is made simple with this door glass and chrome window frame asembly. Includes tinted door...
1955-59, 60-62 Chevy, GMC Stepside Truck, Rear Bumper Bracket Set; with Hardware
Reproduction rear bumper brackets designed for use with 1955?1959 Chevrolet and GMC 2 or 4 wheel drive Stepside models (1955 2nd Series), and 1960?1962 4 wheel drive Stepside models. Each bracket is precision-stamped from...
1955-59 Chevrolet, GMC Suburban; Rear Panel Door Glass; Smoke Gray Tint; LH
Reproduction rear door glass for 2nd series 1955-59 Chevrolet and GMC Suburban and panel truck models. This glass is for models with barn door style rear cargo doors. Features smoke gray tint. Fits the rear barn door on the...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
1958-59 Chevrolet/GMC Pickup; Fleetside; Cross Sill Brace; Rear
The rear cross sill is located below the tailgate, and ties the back of the bed together. Bolted between the bed sides, it provides the rear mounting holes for the bed wood and strips. Note: Shipped double oversize.
1957-59 Chevrolet/GMC Truck Long Bed / Stepside 97" Polished Stainless Steel Angle Strips
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1954-87 Chevrolet, GMC Stepside Pickup; Tailgate Chains; w/Hardware; Stainless Steel
Reproduction tailgate chain set for 1954-1987 Chevrolet and GMC stepside pickup trucks. These chains are manufactured to replicate the original in quality and design. Each chain is manufactured in stainless steel. Sold as a...
1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished
Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1955-59 Chevy, GMC Pickup Truck, Suburban; Manual Door Window Regulator; LH Driver Side
Quality reproduction manual door window regulator for 1955-59 Chevrolet and GMC truck models. Each regulator is manufactured using quality stamped steel replicating the original design, fitment, and functionality. For use on...
1955-59 Chevrolet Truck; Front Bumper Guards; Chrome; Pair
Reproduction of the original front bumper guards for use with 1955-59 Chevrolet pickup truck models. Each bumper guard is manufactured to factory specifications replicating the original in quality, appearance and design....
1955-59 Chevy, GMC Pickup Truck, Suburban; Manual Door Window Regulator; RH Passenger Side
Quality reproduction manual door window regulator for 1955-59 Chevrolet and GMC truck models. Each regulator is manufactured using quality stamped steel replicating the original design, fitment, and functionality. For use on...
1954-87 Chevrolet/GMC Truck; Tail Gate Trunnions; Stepside
Reproduction lower trunnions designed for 1954-1987 Chevrolet and GMC stepside pickup truck models. Each trunnion is manufactured to original factory specifications and plated for long lasting dependability. The trunnions...
1955-59 Chevrolet, GMC Pickup Truck; Vent Window Glass Frames; Black; LH & RH; Pair
Reproduction of the original vent window glass frames for use with 1955-1959 Chevrolet & GMC pickup truck models. Each frame is manufactured to correct factory specifications rfeplicating the original in design, appearance,...
1947-59 Chevy, GMC Pickup, Panel, Suburban Windshield Wiper Bezel Retaining Nuts; Pair
Reproduction windshield wiper bezel retaining nuts for 1947-1959 Chevrolet and GMC truck models. Each nut is manufactured to exact factory dimensions and finished in chrome plating for an authentic appearance. One pair...
1958-59 Chevy Pickup, Suburban; Front Bumper Filler Panel; EDP Coated
OER® Authorized reproduction of the original front bumper filler panel designed for use with 1958-59 Chevrolet Pickup, Suburban and Panel truck models. Each bumper filler panel is manufactured in stamped steel to original...
1957-59 Chevy, GMC Stepside Pickup Truck; Angle Strips; Long Bed; 97"; Stainless; Unpolished
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...
1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Unpolished Stainless
Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1955-72 Chevrolet, GMC Pickup Long Bed; Bed Mounting Pad Set; 1/2 Ton; 10 Piece Set
Keep the truck bed in proper alignment by replacing the old or worn out mounting pads. This mounting pad set is designed for use with 1947-72 Chevrolet and GMC 1/2 ton pickup trucks with long bed. Each set contains the...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1955-1966 Chevrolet, GMC Truck; Rear Fender Brace Set; 3 Piece Set
Reproduction rear fender support braces for 1955-1966 Chevrolet and GMC truck models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and...
1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Raw Steel; Paintable
Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1958-66 Chevrolet/GMC Truck; Tail Gate Trunnions; With Brackets; Fleetside
Reproduction lower trunnions for 1954-1966 Chevrolet and GMC Fleetside pickup truck models. Each trunion is manufactured to original factory specifications featuring a cadmium plating for long lasting dependability. The...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1952-59 Chevrolet/GMC Truck; Outer Door Handle Scuff Plates; Chrome
Reproduction outer door scuff plates for 1952-59 Chevrolet and GMC trucks. Each plate is manufactured in quality die-cast zinc and finished in a bright chrome plating. Replace your pitted, damaged or missing door handle scuff...
1955-59 Chevrolet, GMC Pickup Truck; Interior Door Window Frame; RH Passenger Side
Reproduction interior window frame unit for 1955-59 Chevrolet and GMC trucks. This is the steel frame that surrounds the inside of the glass area on the door. Each window frame is manufactured in stamped steel to original...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1958-66 Chevrolet, GMC Fleetside Pickup; Tailgate Chain Set; With Hardware; Chrome-Plated
Tailgate chain assemblies are used on Fleetside trucks as a method of supporting the gate when open, and securing the gate when it is closed. Each set is manufactured in steel, chrome-plated for corrosion resistance and a...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Secure your rear fenders with this replacement-style Phillips head bolt and hardware set designed for 1947-66 Chevrolet and GMC Stepside models. This kit provides a functional solution for attaching both left-hand and...
1958-66 Chevrolet, GMC Fleetside Pickup; Tailgate Chain Set; With Hardware; Zinc-Plated
Tailgate chain assemblies are used on Fleetside trucks as a method of supporting the gate when open, and securing the gate when it is closed. Each set is manufactured in steel, zinc-plated for corrosion resistance, and...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1955-59 Chevy, GMC Pickup, Panel, Suburban; Front Fender to Cab Braces; Stamped Steel; Pair
Restore proper front-end support on your classic truck with this reproduction pair of front fender braces designed for 1955-59 Chevrolet and GMC pickups. Each brace is precision-stamped from quality steel to replicate the...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1949-63 Buick, Cadillac, Chevy, Pontiac, Olds; Windshield Washer Spray Nozzles; Pair; Various Models
Reproduction windshield washer spray nozzles designed for a variety of 1949-1963 GM models. Each nozzle (8-40 x 1/4") is manufactured to exact factory specifications and finished in high-quality chrome plating for an...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...