Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair
New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...
Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set
Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts. {fitment}
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers
Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1955-70 Full Size Chevy; Upper Ball Joint; with Hardware; RH or LH
Reproduction of the original upper ball joint designed for use with 1955-70 Chevy full size models including 1955-57 Chevy, and 1958-70 Impala, Bel Air, Biscayne, and Caprice models. Control arm ball joints take a beating...
1958-82 Chevrolet; Lower Ball Joint with Hardware; Various Applications
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair
New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Set
Reproduction of the original style lower control arm shafts for use with 1958-64 Impala, Bel Air, Biscayne and full size Chevrolet models. Set include shafts, bushings, washers and washer/bushing retainer bolts. Sold in...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH and RH
Quality reproduction of the lower control arm cross-shafts for use on various 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Upper control arm shafts are manufactured in quality stamped steel to original factory...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1958-64 Impala; Bel Air; Biscayne; 1963-82 Corvette; Lower Control Arm Bumper
Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out. {fitment}
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...