Product#: TF400309

1957 Chevy Bel Air, 150, 210, Nomad; Front Bumper Bracket Set; with Hardware; 10 Piece set

Restore your classic Chevy's front-end integrity with this high-quality reproduction front bumper bracket set, designed for use on 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is meticulously crafted to...


Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...


Product#: 17758C

Bumper Bolt; with Nut; Zinc Plated; with Stainless Steel Cap; 7/16-14 X 1-1/4"; 8 Bolt Set with Nuts; Varius Models

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...


Product#: TF400252

1957 Chevrolet Bel Air, 150, 210n Nomad: Outer Front Bumper Bracket; RH Passenger Side

Reproduction of the original outer front bumper to frame bracket for use with 1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each bracket is manufactured in stamped steel to original...


Product#: TF401222

1957 Chevy Bel Air, 150, 210, Nomad; Rear Bumper End Bracket; RH Passenger Side

Reproduction rear bumper end bracket for 1957 Chevrolet passenger car models. Manufactured in stamped steel to factory specifications. EDP coated for rust prevention. This bracket mounts to the bumper end, and provides...


Product#: TF401221

1957 Chevy Bel Air, 150, 210; Rear Bumper End Bracket; LH Driver Side

Reproduction rear bumper end bracket for 1957 passenger car models. Manufactured in stamped steel to factory specifications. EDP coated for rust prevention. This bracket mounts to the bumper end, and provides additional...


Product#: TF400255

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Frame Bracket; Inner; LH Driver Side

Reproduction of the original inner front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in...


Product#: TF400254

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Frame Bracket; Center; RH Passenger Side

Reproduction of the original center front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes...


Product#: TR17758B

Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...


Product#: TF400258

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper Jack Brace; RH Passenger Side

Reproduction of the original front bumper jack brace designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper jack brace is manufactured in stamped steel and features pre-drilled holes in all the...


Product#: TF400308

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Fender Bracket; RH

Reproduction of the original front bumper to fender bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in all...


Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...


Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...


Product#: TF400989

1957 Chevy Bel Air, 150, 210, Nomad: Front Bumper Chrome Bullet Housings; LH & RH; Pair

Reproduction front bumper bullet housings for various 1957 Chevrolet Bel Air, 150, 210, Nomad and wagon models. Each housing is manufactured in stamped steel to factory specifications featuring original style polished chrome...


Product#: TF400287

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Filler Panel Set; EDP Coated

Reproduction of the original front end filler panels designed for use on 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each panel is precision-stamped from steel to factory specifications, ensuring an authentic...


Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...


Product#: TF401223

1957 Chevy Bel Air, 150, 210; Rear Bumper Bracket Set; 6 Piece Set

Reproduction of the original rear bumper brackets designed to install the rear bumper on  1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each bracket is manufactured in stamped steel to original...


Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...


Product#: TF400259

1957 Chevy Bel Air, 150, 210, Nomad; Front Bumper Bullets; Rubber OE Style; Pair

Correct reproduction rubber front bumper bullets for 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each front bumper rubber bullet is manufactured to correct factory specifications replicating the design, appearance,...


Product#: K49007

License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear

Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...


Product#: 153999B

1981-87 Buick Regal; Rear License Plate Bracket; also Universal Fit for Trucks and Street Rods with Custom Roll Pans

License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...


Product#: K49067

License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)

Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...


Product#: TF400251

1957 Chevrolet Bel Air, 150, 210, Nomad: Outer Front Bumper Bracket; LH Drivers Side

Reproduction of the original outer front bumper to frame bracket for use with 1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each bracket is manufactured in stamped steel to original...


Product#: TF400256

1957 Chevrolet 150/210/Bel Air/Delray;Nomad; Bracket; Front Bumper To Frame; Inner; RH Passenger Side

Reproduction of the original inner front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in...


Product#: TF400253

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Frame Bracket; Center; LH Driver Side

Reproduction of the original center front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes...


Product#: TF400257

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper Jack Brace; LH Driver Side

Reproduction of the original front bumper jack brace designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper jack brace is manufactured in stamped steel and features pre-drilled holes in all the...


Product#: TF400307

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Fender Bracket; LH Driver Side

Reproduction of the original front bumper to fender bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in all...


Product#: *C15322

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....


Product#: MN1709

7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head

This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...


Product#: OER29

Original Equipment Reproduction License Plate

Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.


Product#: TF400243

1957 Chevy Bel Air, 150, 210, Del Ray; Outer Rear Bumper Ends; Chrome; Pair

Reproduction of the original style chrome outer rear bumper ends for use with 1957 Chevrolet Bel Air, 150, 210, & Del Ray models. Manufactured in die-cast zinc to correct factory dimensions featuring a lustrous bright...


Product#: A1021

1979-2002 Universal Retainer Clip; Push-In Style; 1" Diameter Head; 3/4" Stem Length; for 1/2" Hole; Nylon; Black

Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Sold...


Product#: HK26

License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)

This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...


Product#: TR17758A

1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...


Product#: 9853

5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each

Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...


Product#: 5243

7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each

Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...


Product#: *C15318

1982-02 Camaro, 1979-02 Firebird; Front & Rear Bumper Cover Retainer Clip Set; Push-In Style; Black; 25 Piece Set

Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...


Product#: A5477

7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc

7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc chromate finish. Sold individually.


Product#: 347347

All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"

Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...