Product#: K4122

1947-2010 Windshield & Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...


Product#: 3864327

1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...


Product#: TF300148

1956-57 Bel Air, 150, 210, Chieftain; Back Window Glass Weatherstrip Seal; 2 & 4 Door; Sedan,

Reproduction weatherstripping that surrounds the back window glass channel on 1956-57 Chevrolet and Pontiac 2 and 4 door sedan models as listed below. After years of exposure to the sun and weather, this weatherstrip usually...


Product#: TF300144

1955-57 Bel Air, Chieftain, Star Chief; Back Glass Weatherstrip Seal, 2 Door Hardtop

Reproduction of the original weatherstripping designed for use on 1955-57 Chevrolet Bel Air 2 door hardtop models, and Pontiac Chieftain, Star Chief, Super Chief 2 door hardtop models. Manufactured in the correct...


Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...


Product#: TF300234

1955-57 Chevrolet Window Stop Set Upper Inside Door - Set Of 4

Reproduction window stops for 1955-57 Bel Air, 210 and 150 Chevrolet 2 and 4 door, Nomad and convertible models. Used to adjust the UP travel of the window. Set of 4 bumpers.


Product#: TF300096

1955-57 Chevrolet; Bel Air; Flipper-To-Vent Window Rubber Bumpers; 2 Door Hardtop; LH and RH

Flipper assembly to vent window rubber bumpers for 1955-57 Chevrolet Bel Air 2-door hardtop models. Covers forward metal tab of flipper. LH and RH. {fitment}


Product#: 4410574

Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each

Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.


Product#: TF300263

1955-57 Chevy Bel Air; Door Frame Weatherstrip; w/Molded Ends; 2 Door Hardtop, Convertible; Pair

Reproduction of the original style door frame weatherstrips designed for use with 1955-57 Chevrolet Bel Air, Pontiac Chieftain, Starchief, and 1957 Bonneville two door hardtop and convertible models. Creates a weather-tight...


Product#: TF300152

1957 Chevrolet, Pontiac; Trunk Weatherstrip with Clips; 2 and 4 Door, Sedan, Hardtop, Convertible

Reproduction trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft extruded...


Product#: TF300108

1956-57; Bel Air, 210, Chieftain; Rear Door Frame Weatherstrip; 4 Door; Hardtop; RH and LH; Pair

Reproduction of the original rear door frame weatherstrips for 1956-57 Chevrolet four door hardtop models. Each weatherstrip is manufactured to replicate the original for an authentic fit and appearance. Create a...


Product#: TF300107

1956-57 Chevy Bel Air, 150, 210; Front Door Weatherstrips; with Molded Ends; 4 Door Hardtop

Reproduction of the original front door frame weatherstrips designed for use with 1956-57 Chevrolet Bel Air, and Pontiac Chieftain, Star Chief, and Superchief four door hardtop models. Create a weather-tight seal between the...


Product#: TF300109

1955-57 Chevy Bel Air, 150, 210; Front Door Frame Weatherstrips; without Molded Ends; 2 door; Hardtop, Convertible

Reproduction of the original style door frame weatherstripping designned for use with 1955-57 Chevrolet and Pontiac hardtop and convertible 2 door models. Create a weather-tight seal between the front doors and the body....


Product#: K2017

1955-81 Chevrolet, GMC, Pontiac; Air Cleaner Lid Rubber Seal; 59" Long x 5/16" Wide

Reproduction air cleaner lid seal for a variety of GM car and truck models as listed. Designed to seal the area between the lid and the base offering a tight seal for the air cleaner on models that required this seal. {specs}...


Product#: TF300224

1955-57 Chevrolet Bel Air, 150, 210; Spare Tire Well Plug; Each

Reproduction of the original spare tire body plug designed for use with 1955-57 Chevrolet models. Each rubber plug is manufactured in EPDM rubber replicating the original configuration. Sold individually. Use as required....


Product#: TF300254

1955-57 Chevy Bel Air, 150, 210, Nomad; Dome Lamp Harness Grommet; Hardtop

Molded rubber reproduction dome lamp harness grommet for 1955-57 Chevy Bel Air, 150, 210, and Nomad hardtop models. This grommet prevents wire damage and measures 2-1/4" OD x 1/4" ID and fits a 1-1/2" hole. {fitment}


Product#: 3792828

1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models

Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...


Product#: K940

1955-90 GM; Door Lock Gasket; Various Models

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...


Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...


Product#: 4566397

1955-1976 Glove Box Door Arm Rubber Stopper

Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...