1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1957 Chevrolet Bel Air, 150, 210 Station Wagon, Nomad; Fuel Tank; Zinc Coated; 17 Gallon Tank
Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, 210, station wagon and Nomad models (except 9 passenger models). This reproduction tank is manufactured in quality zinc coated steel and...
Correct reproduction of the original fuel tank designed for with 1957 Chevrolet Bel Air, 150, and 210 models (except station wagon, Nomad models.. This reproduction fuel tank is manufactured in stainless steel replicating the...
1955-59 Chevrolet, GMC Pickup Truck; Fuel Tank; Zinc Coated; 18 Gallon Tank
Reproduction of the original fuel tank designed for use with 1955-1959 Chevrolet and GMC pickup models. This fuel tank is manufactured to original factory specifications featuring the correct configuration for an authentic...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1957 Chevy Bel Air, 150, 210; Niterne Coated Fuel Tank; 16 Gallon; w/Square Corners; with Vent Tube
Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality NiTerne coated steel and features square corners and comes...
Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1957 Chevrolet Bel Air, 150, 210 models except Nomad, and station wagons. This OE-quality Ni-Terne coated reproduction stamped steel fuel tank...
Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality zinc coated steel and features square corners and comes...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel level in...
1955-59 Chevrolet, GMC Truck; Fuel Filler Installation Kit
Reproduction of the original components required to replace the fuel filler assembly. This comprehensive kit is a must when installing a new fuel tank into your 1955-59 Chevrolet or GMC truck. Each set includes reproductions...
A reproduction of the original upper fuel tank filler neck designed for use with 1957 Chevrolet Bel Air, 150, 210, and Del Ray, 2 & 4 door convertible, hardtop, and sedan models. Each filler neck is manufactured in quality...
1955-57 Chevy Bel Air, Corvette, 150, 210, Nomad; Accelerator Pedal Pad
Correct reproduction accelerator pedal for 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each pad is manufactured to correct factory specifications replicating the original in design and fitment. Features correct...
1957 Chevy Bel Air, 150, 210; Fuel Door Inner Support Box ; Inside Quarter Panel
Reproduction fuel box door for 1957 Chevrolet models. This reproduction is installed in the quarter panel where the gas fuel door is located. Manufactured in stamped steel to original specifications. Includes the fuel door...
This is a must when installing a new fuel tank into 1955-59 Chevrolet and GMC pickup truck models. Sets include a chrome fuel filler neck, filler neck to cab rubber grommet, fuel tank to filler neck hose, vent hose, and a...
Reproduction of the original gas tank straps designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Del Ray coupe and sedan models. Each strap is manufactured in quality stainless steel with all correct contours for an...
1955-57 Chevrolet Wagon & Nomad; Fuel Tank Sending Unit; 3/8" Line
Reproduction fuel sender for your classic Chevy wagon or Nomad. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...
1956-57 Chevrolet; Fuel Tank Sending Unit; For 9 Passenger Wagon; 5/16" Line
Reproduction fuel sender for your classic Chevy 9-passenger wagon. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...
Reproduction of the original fuel tank mounting straps designed for use with 1955-59 Chevrolet, GMC pickup truck models (1955 2nd design). Each fuel tank strap is manufactured in quality stamped steel, galvanized, and EDP...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1956-62 Chevrolet Corvette; Fuel Tank Mounting Straps; Stainless Steel
Reproduction fuel tank mounting straps for 1956-62 Chevrolet Corvette. Each strap is manufactured in stainless steel offering a custom appearance. Stainless steel offers superior rust and corrosion resistance. Sold in a pair.
1955-59 Chevy, GMC Pickup, Suburban; Throttle Cable; with Chrome Knob
Reproduction of the original throttle cable designed for use with 1955-59 Chevrolet and GMC truck models as listed. Each cable is manufactured to factory specifications replicating the original in length and appearance...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1955-57 Chevrolet Station Wagon - Fuel Tank Support Straps - Steel (Pair)
Reproduction fuel tank mounting straps for 1955-57 wagon models. Produced using heavy duty zinc-plated material with all correct contours for an authentic fit and appearance.Approximate strap measurement bend to bend is - 32...
1956-62 GM; Fuel Tank Filler Hose; 2" ID x 4-7/16" Length
Reproduction fuel tank filler hose for 1957 models. Hose is specifically engineered to stand up to gasoline, fuel oil, and other petroleum-based products. Clamps sold seperately. Measures 4-7/16" in length, inside diameter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1953-62 Chevrolet Corvette; Fuel Tank Straps; Stamped Steel; EDP Coated; Pair
Reproduction fuel tank mounting straps for 1956-1962 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Features a black EDP coating for rust and corrosion...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Correct reproduction of the original fuel tank designed for with 1957 Chevrolet Bel Air, 150, and 210 models (except station wagon, Nomad models. This reproduction fuel tank is manufactured in stainless steel replicating the...
Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1957 Chevrolet Bel Air, 150, 210, and Nomad station wagon models except 9 passenger wagons. This OE-quality fuel tank is manufactured in...
Reproduction of the original fuel tank designed for use with 1955-1959 Chevrolet and GMC pickup truck models as listed. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
Reproduction stamped steel fuel tank for 1957 to Early 1961 Corvette with VIN #'s 1421 through 3200. Manufactured to factory specifications and finished in a zinc coating for corrosion resistance. Comes with lock ring gasket...
Reproduction fuel tank for 1956 to early 1957 Chevrolet Corvette models up to VIN # 1420. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion...
1947-59 Chevy, GMC Pickup Truck; Fuel Tank Sending Unit
Reproduction of the original fuel sending unit installed on all 1947-59 Chevrolet and GMC pickup truck models. Each sending unit is manufactured to factory specifications and includes a brass float, steel screen filter, and...
Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality zinc coated steel and features square corners without a...
1955-70 Impala, Full Size; Fuel Tank Mounting Strap Hardware Set; 6-Pieces
Use proper mounting hardware to make your fuel tank installation job easier. This hardware set is the correct replacement fuel tank strap bolt set for 1955-70 full size Chevrolet models including 150, 210, Bel Air, Impala,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Reproduction of the original fuel tank sending unit designed for use with 1955-57 Chevrolet Bel Air, 150, 210 sedan and convertible models. Don't run out of fuel because of a defective sending unit. Replace that old worn out...
A reproduction of the original upper fuel tank filler neck designed for use with 1957 Chevrolet Bel Air, 150, 210, and Del Ray, 2 & 4 door convertible, hardtop, and sedan models. Each filler neck is manufactured in quality...
1955-57 Chevrolet Bel Air, 150, 210, Nomad; Fuel Sending Unit & Filler Neck O-Ring
Reproduction of the original style fuel sending unit and filler neck O-ring designed for use with 1955-1957 Chevrolet Bel Air, 150, 210, and Nomad models. This O-ring is manufactured to correct factory dimensions and replaces...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1955-57 Chevy Bel Air, 150, 210; Station Wagon; Fuel Tank Support Straps; Stainless Steel
Reproduction fuel tank mounting straps for 1955-57 Chevrolet Bel Air station wagon models. Produced using stainless steel material with all correct contours for an authentic fit and appearance. Approximate strap measurement...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1955-57 Chevy Bel Air, 150, 210 Station Wagon, Nomad; Fuel Tank Sending Unit; 5/16" Line
Reproduction fuel tank sending unit for 1955-57 Chevrolet Bel Air, 150, 210 station wagon models (except 9 passenger) and Nomad models. Don't run out of fuel because of a defective sending unit. Replace that old worn out unit...
1956-60 Chevrolet Corvette; Gas Tank Fuel Filler Neck
Reproduction of the original style fuel filler neck for the gas tank on 1956-60 Chevrolet Corvette models. Manufactured in steel tubing for original fit and OE appearance.
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Reproduction of the original fuel tank mounting straps designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Del Ray coupe and sedan models. Each strap is manufactured in quality stamped steel, galvanized and EDP coated...
Universal fuel tank sending unit for various 1931-53 Chevrolet and GMC trucks with custom tank under the bed and other GM models up to 1964 that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1955-86 Chevy, GMC, Pontiac; Fuel Pump Push Rod; Small Block / Big Block
Reproduction fuel pump push rod for 1955-86 Chevrolet, GMC, and Pontiac models. Fits Chevrolet small block, big block, and Pontiac V8 engines. 5-3./4" long x 1/2" dia.
1955-59 Chevrolet/GMC Truck; Choke Cable; With Black Knob
Reproduction of the original choke cable designed for use with 1955-59 Chevrolet and GMC truck models as listed. Each cable is manufactured to factory specifications replicating the original in length and appearance offering...
1955-59 Chevrolet/GMC Truck; Throttle Cable; With Black Knob
Reproduction of the original throttle cable designed for use with 1955-59 Chevrolet and GMC truck models as listed. Each cable is manufactured to factory specifications replicating the original in length and appearance...