Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1947-55 Chevrolet/GMC Truck; Rear Bumper Bracket Set; 1/2 Ton
Reproduction rear bumper brackets for 1947-55 Chevrolet and GMC 1/2 ton, Shortbed models. Each bracket is manufactured from quality stamped steel to the correct configuration. Will replace the old or bent original brackets...
1955-58 Cameo, Suburban Carrier; Rear Bumper Brace, Bracket Set; 3-Piece Set; RH Passenger Side
Quality reproduction of the original rear bumper bracket set for 1955-58 Chevrolet Cameo, or GMC Suburban Carrier Fleetside pickup truck. Each 3-piece set is designed to attach one side of the rear bumper to the frame rail....
Reproduction rear bumper brackets for 1955-59 Chevrolet and GMC Stepside Models (1955 2nd Series models) and 1960-62 4WD Stepside models. Each bracket set is manufactured from quality stamped steel to the correct...
1947-55 Chevrolet, GMC Truck; Chrome Bumper Guards; Front or Rear; Pair
Reproduction chrome plated bumper guards for 1947-55 Chevrolet & GMC truck models. Each bumper guard is manufactured in quality die-cast zinc featuring a brightly polished chrome plating offering an authentic appearance and...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
1955-57 Chevrolet, GMC Truck; Front Bumper Bracket Set; with Hardware
Reproduction of the original front bumper brackets designed for use on 1955-57 Chevrolet and GMC models. Each bracket is manufactured from quality stamped steel to the correct configuration with pre-punched holes for...
3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
1955-58 Chevrolet Cameo/GMC Suburban Carrier; Bumper Brace, Bracket Set; 6-Pieces; Rear; RH/LH
Reproduction bumper bracket set for Chevrolet Cameo or GMC Suburban Carrier Fleetside pickup truck. Each 6-piece set will attach both sides of the rear bumper to the frame rail. This full set is for the RH passenger side and...
1938-72 GM Car & Truck; Bumper Bolt, Nut, And Washers; 1/2"-13 X 1-1/2"; Chrome
Reproduction bumper bolt, washer, nut for 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Each 4-piece set features the correct chrome-plated carriage bolt with authentic style tall "Domed Head". Bolt can...
1955-58 Cameo, Suburban Carrier; Rear Bumper Brace, Bracket Set; 3-Piece; LH Driver Side
Quality reproduction of the original rear bumper bracket set for 1955-58 Chevrolet Cameo, or GMC Suburban Carrier Fleetside pickup truck. Each 3-piece set is designed to attach one side of the rear bumper to the frame rail....
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1947-55 Chevrolet, GMC Truck; Front Bumper Bracket Set; with Hardware
Reproduction of the original front bumper brackets designed for use on 1947-55 Chevrolet and GMC models. Each bracket is manufactured from quality stamped steel to the correct configuration with pre-punched holes for...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
Reproduction bumper bolt, washer and nuts for 1947-1972 Chevrolet, GMC pickup truck, Blazer, Jimmy, Suburban models, and 1938-1954 Chevrolet passenger cars in black. Set features the black powder-coated carriage bolt with...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...