Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-69 Chevy, GMC Pickup, Blazer, Suburban; Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3-piece stainless steel screw set designed for mounting the outer door side mirror arms on 1947-1972 Chevrolet and GMC pickup truck models. Each screw set is manufactured from premium stainless steel for...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
1951-55 Chevrolet, GMC Truck, Vent Window Assembly; with Chrome Division Bar; Tinted Glass; LH
Reproduction of the original door vent window assembly for 1951-55 Chevrolet and GMC truck models. Each glass assembly is manufactured to OE specifications replicating the original in quality, fitment, and design. This vent...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1951-55 Chevrolet, GMC Truck, Vent Window Assembly; with Black Division Bar; Tinted Glass; RH
Reproduction of the original door vent window assembly for 1951-55 Chevrolet and GMC truck models. Each glass assembly is manufactured to OE specifications replicating the original in quality, fitment, and design. This vent...
1947-72 Chevy, GMC Pickup Blazer, Jimmy, Suburban; Round Door Mirror Head; Chrome; Smooth Backing
Reproduction exterior round mirror head for 1947-72 Chevrolet & GMC truck models. This reproduction mirror head is design to replace the worn out or missing original. Features a chrome backing with a 5" smooth, non-ribbed...
1954-55 Chevrolet, GMC Pickup; Front Windshield Glass; Clear
Reproduction windshield for 1954-55 Chevrolet and GMC pickup truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and configuration. Windshields are...
1955-59 Chevy, GMC Pickup, Suburban; Sedan Delivery; Front Bumper; Chrome;
Reproduction of the original front bumper for 1955-59 Chevrolet and GMC pickup, Sedan Delivery, and Suburban models. Each bumper is manufactured to OE specifications replicating the original for an authentic appearance and...
1954-55 Chevrolet, GMC Pickup; Front Windshield Glass; Gray Tinted Without Shade
Reproduction windshield for 1954-55 first series Chevrolet and GMC pickup truck models. Each windshield is manufactured to factory specifications and replicates the original in appearance and configuration. Windshields are...
1955-59 Chevrolet, GMC Pickup Truck; Front Windshield Glass; Gray Tinted With Dark Gray Shade
Reproduction windshield glass for 1955-59 Chevrolet and GMC pickup truck models. Each glass is manufactured to correct factory dimensions replicating the exact design of the original. Windshield is manufactured in laminated...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1949-1955 Chevrolet, GMC Pickup Truck; Door Window Frame Molding; Stainless Steel; LH & RH; Pair
Reproduction of the original exterior window frames designed for use with 1949-55 Chevrolet and GMC truck models. Each frame is manufactured in stamped stainless steel to exact factory specifications replicating the original...
1952-59 Chevrolet, GMC Pickup Truck; Outer Door Handle Set; with Push Button & Hardware
Reproduction of the original outer door handle and push button set designed for use with 1952-1959 Chevrolet and GMC pickup truck models. Each handle is precision-manufactured in high-quality die-cast zinc and finished with a...
1954-55 Chevrolet, GMC Pickup Truck; Chrome Rear Bumper; Stepside
Reproduction of the original bumper designed for use with 1954-55 Chevrolet and GMC Stepside pickup truck models. Each bumper is manufactured to correct factory dimensions replicating the original in quality and design....
1947-55 Chevrolet, GMC Pickup, Panel, Suburban; Door Hinges; Upper & Lower; LH Driver Side; Pair
Reproduction door hinge set designed for use with 1947-55 Chevrolet and GMC truck models. Each hinge is manufactured from quality stamped steel and accurately replicates the original design, ensuring proper fit, strength, and...
1947-55 Chevrolet, GMC Pickup, Panel, Suburban; Door Hinges; Upper & Lower; RH Passenger Side; Pair
Reproduction door hinge set designed for use with 1947-55 Chevrolet and GMC truck models. Each hinge is manufactured from quality stamped steel and accurately replicates the original design, ensuring proper fit, strength, and...
1947-79 Chevy, GMC Car & Truck; Chrome Drop Mount Peep Mirror; 4"; LH or RH; Each; Various Models;
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4" mirror head. Fits sedan and truck closed...
1947-55 GMC Pickup Truck; Hood Latch Panel Assembly; EDP Coated
Reproduction hood latch panel and hood latch assembly for 1947-1954 GMC pickup truck models. Each panel is manufactured in quality stamped steel that replicates the original in design, appearance, and fitment. Includes the...
1954-55 Chevrolet, GMC Pickup; Front Windshield Glass; Tinted
Reproduction of the original windshield designed for use with 1954-55 Chevrolet and GMC pickup truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance...
Reproduction tailgate latch assembly for the RH side on 1955-58 Chevrolet Cameo or GMC Suburban Carrier pickups. Housing is manufactured in stamped steel and plated in bright chrome for an original appearance. Handle is...
1955-1959 Chevrolet, GMC Truck; Clear Door Glass Assembly; Chrome Frame, Setting Channel; RH
Reproduction of the original door glass assembly for use with 1955-59 Chevrolet and GMC truck models. Glass installation is made simple with this door glass and window frame assembly. Includes clear door glass, the chrome...
1947-55 Chevy, GMC Pickup, Suburban; Inner Fender Skirt; LH Driver Side; EDP Coated
Reproduction front inner fender skirt for 1947-55 Chevrolet Pickup and Suburban models. Each inner fender skirt is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1947-55 Chevrolet, GMC Pickup, Suburban; Inner Fender Skirt; RH Passenger Side; EDP Coated
Reproduction front inner fender skirt for 1947-55 Chevrolet Pickup and Suburban models. Each inner fender skirt is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1947-55 Chevrolet, GMC Pickup Truck; Front or Rear Chrome Bumper Guards; with Hardware; Pair
Reproduction of the original chrome plated front or rear bumper guards for use with 1947-55 Chevrolet and GMC pickup truck models. Each bumper guard is manufactured in quality die-cast zinc featuring a brightly polished...
1947-55 Chevy, GMC Pickup Truck; Rear Bumper Bracket Set; 1/2-Ton Shortbed
Reproduction rear bumper brackets designed for use with 1947?1955 Chevrolet and GMC 1/2-ton Shortbed truck models. Each bracket is precision-stamped from high-quality steel and manufactured to match the original factory...
1955-1959 Chevrolet, GMC Truck; Tinted Door Glass and Chrome Frame; w/Channel Setting; RH
Reproduction of the original front door glass assembly designed to replace the glass on 1955-59 GM truck models. Glass installation is made simple with this door glass and chrome window frame asembly. Includes tinted door...
1955-1959 Chevrolet, GMC Truck; Clear Door Glass Assembly; with Black Frame, Setting Channel; RH
Reproduction of the original door glass assembly for use with 1955-59 Chevrolet and GMC truck models. Glass installation is made simple with this door glass and window frame assembly. Includes clear door glass, the black door...
1955-57 Chevrolet, GMC Truck; Inner Fender Skirt; RH Passenger Side; EDP Coated
Bring your classic truck back to factory-fresh condition with this premium reproduction front inner fender skirt designed for 1955-57 Chevrolet and GMC Pickup models. Expertly stamped in heavy-gauge steel, this panel...
1955-59, 60-62 Chevy, GMC Stepside Truck, Rear Bumper Bracket Set; with Hardware
Reproduction rear bumper brackets designed for use with 1955?1959 Chevrolet and GMC 2 or 4 wheel drive Stepside models (1955 2nd Series), and 1960?1962 4 wheel drive Stepside models. Each bracket is precision-stamped from...
1955-1959 Chevrolet, GMC Truck; Tinted Door Glass; Black Frame; w/Channel Setting; LH
Reproduction of the original front door glass assembly designed to replace the glass on 1955-59 GM truck models. Glass installation is made simple with this door glass and chrome window frame asembly. Includes tinted door...
Reproduction front inner fender skirt for 1947-55 Chevrolet Pickup and Suburban models. Each inner fender skirt is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1955-59 Chevrolet, GMC Suburban; Rear Panel Door Glass; Smoke Gray Tint; LH
Reproduction rear door glass for 2nd series 1955-59 Chevrolet and GMC Suburban and panel truck models. This glass is for models with barn door style rear cargo doors. Features smoke gray tint. Fits the rear barn door on the...
1954-87 Chevy, GMC Stepside; Rear Roll Pan; with License Plate Pocket; without License Lamps
Customize the rear end of your classic Chevrolet or GMC stepside pickup truck with a sleek looking steel rear roll pan. This all steel roll pan is just what you need to add a cutom appearance. Manufactured in stamped steel...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
1952-59 Chevy, GMC Pickup, Suburban; Door Lock Strikers; Pair
OER® Authorized reproduction door lock strikers for 1952-59 Chevrolet and GMC pickup and Suburban models. Manufactured as original for a perfect fit and function. Includes 2 door strikers for use on RH and LH doors. Sold...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1954-87 Chevrolet, GMC Stepside Pickup; Tailgate Chains; w/Hardware; Stainless Steel
Reproduction tailgate chain set for 1954-1987 Chevrolet and GMC stepside pickup trucks. These chains are manufactured to replicate the original in quality and design. Each chain is manufactured in stainless steel. Sold as a...
1955-59 Chevy, GMC Pickup, Panel, Suburban; Front Door Latch Assembly; RH Passenger Side
OER® Authorized reproduction door latch assembly designed for use with 1955-59 Chevrolet and GMC truck models as listed. Each latch is manufactured to the original factory specifications, accurately duplicating the...
1947-55 Chevy, GMC Pickup Truck; Back Window Glass; Clear
Reproduction of the original back window glass designed for use with 1947-55 Chevrolet and GMC pickup models. Each back glass is manufactured to correct factory specifications offering an original appearance and fitment. Each...
1955-57 Chevrolet, GMC Pickup Truck; Hood Hinge Assembly; LH Drivers Side
Reproduction of the original hood hinge designed for use on 1955-57 Chevrolet and GMC pickup trucks. Restore proper hood operation by replacing the old or worn out original with this quality reproduction. This hood hinge...
1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished
Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1955-59 Suburban Rear Panel Tinted Door Glass; LH
Reproduction rear door glass for 2nd series 1955-59 Chevrolet and GMC Suburban and panel truck models. This glass is for models with barn-door style rear cargo doors. Fits left hand (driver) side.
1955-57 Chevrolet, GMC Truck; Hood Latch Assembly
Reproduction of the original hood latch assembly designed for use with 1955-57 Chevrolet and GMC pickup, and Suburban models. Each latch is manufactured to factory specifications offering an original appearance and fit. Will...
1955-57 Chevrolet, GMC Pickup, Suburban; Front Bumper Bracket Set; with Hardware
Restore your classic truck's front-end integrity with this correct reproduction front bumper bracket set, designed for use on 1955?1957 Chevrolet and GMC truck models. Each bracket is precisely "stamped from high-quality...
1954-55 Chevrolet, GMC Stepside Pickup Truck; Rear Cross Sill; 1/2 Ton; with 8 Boards
Reproduction of the original rear cross sill for use with 1954-55 Chevrolet and GMC 1/2 ton Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between...
1955-57 Chevrolet, GMC; Bed Angle Strips; Long Bed; Stepside; 89"; Polished Stainless Steel
Reproduction of the original angle strips that attach the side boards on 1955-57 Chevrolet and GMC Pickup Stepside long bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1947-55 Chevrolet, GMC Pickup Truck; Hood Hinge Assembly; LH Drivers Side; EDP Coated
OER® Authorized reproduction of the original hood hinge designed for use on 1947-1955 Chevrolet and GMC truck models. Each hinge is manufactured in quality stamped steel to original GM specifications and replaces the...
1955-59 Chevy, GMC Pickup Truck, Suburban; Manual Door Window Regulator; LH Driver Side
Quality reproduction manual door window regulator for 1955-59 Chevrolet and GMC truck models. Each regulator is manufactured using quality stamped steel replicating the original design, fitment, and functionality. For use on...
1955-59 Chevy, GMC Pickup Truck, Suburban; Manual Door Window Regulator; RH Passenger Side
Quality reproduction manual door window regulator for 1955-59 Chevrolet and GMC truck models. Each regulator is manufactured using quality stamped steel replicating the original design, fitment, and functionality. For use on...
1954-87 Chevrolet/GMC Truck; Tail Gate Trunnions; Stepside
Reproduction lower trunnions designed for 1954-1987 Chevrolet and GMC stepside pickup truck models. Each trunnion is manufactured to original factory specifications and plated for long lasting dependability. The trunnions...
1955-59 Chevrolet, GMC Pickup Truck; Vent Window Glass Frames; Black; LH & RH; Pair
Reproduction of the original vent window glass frames for use with 1955-1959 Chevrolet & GMC pickup truck models. Each frame is manufactured to correct factory specifications rfeplicating the original in design, appearance,...
1954-55 Chevrolet, GMC Pickup Truck; Angle Strips; Stepside; Long Bed; Polished Stainless; Pair
Reproduction of the original angle strips designed for use with 1954-55 Chevrolet and GMC pickup truck models. These angle strips are manufactured to factory specifications and attach to the side boards on Stepside long bed...