Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1947-55 1st Series Chevrolet, GMC Pickup Truck; Crossmember Kit; Bolt-In IFS
Bolt-in IFS conversion kit for 1947-54 GM pickup with V8 engine. Improve your truck's ride, handling, and performance with our unique IFS crossmember kit that converts your antiquated stock front suspension and steering box...
1947-55 1st Series Chevrolet and GMC Pickup; Crossmember Kit; Weld-In IFS
Weld-in IFS conversion kit designed for use with 1947-54 Chevrolet pickup truck models. Improve your ride, handling, and performance with this unique IFS crossmember kit that converts the antiquated stock front suspension and...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 39-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1947-55 Chevrolet, GMC Truck; OE Style Front Shock Absorber; Gray Finish; Each
Reproduction front shock absorber Chevrolet and GMC truck models. Each shock is manufactured to exact factory specifications replicating the original in quality, functionality, and appearance. This accurate reproduction is...
1947-55 Chevrolet, GMC Truck; OE Style Rear Shock Absorber; Gray Finish; Each
Reproduction rear shock absorber for Chevrolet and GMC truck models. Each shock is manufactured to exact factory specifications replicating the original in quality, functionality, and appearance. This accurate reproduction is...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1953-62 Chevy Corvette; Leaf Spring Shackle; With Bushings; LH or RH; Per Side
Reproduction rear leaf spring shackle with bushings for 1953-62 Chevrolet Corvette models. Each shackle includes 8 total pieces to fit either the LH or RH side. Comes with the bushings and installation hardware. Two are...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1947-59 Chevrolet, GMC,Truck, 1948-56 Ford Truck; Rear Sway Bar; 7/8" Diameter
Rear sway bar and hardware for 1947-59 Chevrolet, GMC pickup trucks and 1948-56 Ford pickup truck models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...