KBS RustSeal; Rust Preventive Corrosion Barrier Coating; Gloss Black; 5 Gallon Pail

OER® Authorized RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive, corrosion barrier coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel.

RustSeal is an incredible, single-component, ready-to-use, high solids content, rust preventive coating with exceptional sealing properties. Using premium quality materials and advanced color formulations, this high tech performance coating is the present-day answer for 21st century rust protection.

RustSeal is the most permanent cost-effective solution for stopping rust and corrosion anyplace where it is a problem: home, automotive, industry, fleet, farm and more! RustSeal® is an enhancement that lasts. Water and air are locked out, therefore oxidation, the precursor to rust, cannot take hold. It's technology that's unbeatable! Satisfaction guaranteed!

RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal's guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips.

8oz of RustSeal will cover 12.5 sq. ft. with 2 coats
A Pint of RustSeal will cover 25 sq. ft. with 2 coats
A Quart of RustSeal will cover 50 sq. ft. with 2 coats
A Gallon of RustSeal will cover 200 sq. ft. with 2 coats
A 5 Gallon Pail of RustSeal will cover 1000 sq. ft. with 2 coats

RustSeal Applications:

Automotive:
Chassis
Floor pans
Wheel wells fenders
Trunks
Engines
Suspension parts
Axles
Roof drains
Springs
Doors
Almost every part on a car except the exhaust!
Marine:
Engine rooms
Hulls
Masts
Bilges
Heat exchangers
Decks
Chain lockers
Pumps
Fuel tanks
Boat trailers
and more!
Industrial:
Heavy transport
Steam pipes
Sealing concrete
Air conditioning repair
Fiberglass repair
Rebar coating
Steel roof
Fuel and waste-water treatment tanks
and more!
Other Uses:
Hand rails
Support beams
Lawn equipment
Garage floors
Pipe work
Appliances
Lead-based paint encapsulation
and more!

• High surface tolerance for many different types of applications
• Apply directly over treated rust
• High solids, single component formula
• Widest array of non-porous color formulas
• Combines with atmospheric moisture to cure
Excellent surface penetration and adhesion
• Forms permanent non-porous barrier against moisture and oxygen
• Waterproof coating strengthened by repeated exposure to moisture
• Mold and mildew resistant
• High abrasion and chemical resistance
• Repels fuels, oils, most acids & alkalis, and graffiti
• Will not crack, flake or peel
• Withstands temps up to 600°F (316°C)
• Brush, roll or spray application
• Superior flow and leveling
• Flexible coating allowing expansion and contraction
• Compatible with all paint systems
• VOC compliant
• Lead-Free

The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.